Barometric Correction - do I need it

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
luxmoggy
MS/Extra Newbie
Posts: 21
Joined: Thu Mar 14, 2013 6:08 am

Barometric Correction - do I need it

Post by luxmoggy »

Hello,
I have been reading lots about Barometric Correction. The question is do I need it constants correction or get the value on start enough?
I live at 200M (600ft). My drive to work goes under 100M (300ft) and finishes at 400M (1200ft). I regularly go to sea level and a few times a year I will go higher.

I am hoping to fit the engine and start it around Christmas.

Thanks

http://joebloggs.no-ip.org/
elutionsdesign
Super MS/Extra'er
Posts: 1341
Joined: Mon Sep 05, 2011 1:20 pm

Re: Barometric Correction - do I need it

Post by elutionsdesign »

Value on start will work fine.
Graduate of EFI University.

I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
luxmoggy
MS/Extra Newbie
Posts: 21
Joined: Thu Mar 14, 2013 6:08 am

Re: Barometric Correction - do I need it

Post by luxmoggy »

Hello,
Out of interest at what height change does the Barometric correction start to be needed?
Thanks
Post Reply