coil on plugs
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 2
- Joined: Tue Oct 14, 2014 9:44 am
coil on plugs
Hi. I want to connect a four cylinder motorbike with coil-on-plugs to MS V4. The only information I seem to have is to use a two-coil pack and wire for "wasted spark". I don't want to do that. Is it simply a question of using V4 pinouts for coils A,B,C and D, and if so what order do they go in? (ie does A correspond to cylinder 1, B to cylinder 3, C to cylinder 4 and D to cylinder 2 to correspond with firing order 1,3,4,2? Do I have to put the setting on ignition to "coil on plugs" and are there any other settings I need to know about? Thanks in anticipation, Mike, Kenilworth UK.
Re: coil on plugs
whats a ms v4??
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
-
- Super MS/Extra'er
- Posts: 9128
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
Re: coil on plugs
I think it is an illegal M-tech version. (Just checked on the counterfeit page and that would seem to be the case).grom_e30 wrote:whats a ms v4??
Jean
-
- MS/Extra Newbie
- Posts: 2
- Joined: Tue Oct 14, 2014 9:44 am
Re: coil on plugs
Hi. I don't think it's an illegal version, I purchased it openly and properly on the UK from MTech Automotive. I could ask them I suppose but I don't think they are up to the sort of technical knowledge as members of this forum. Regards, Mike
Re: coil on plugs
http://www.msextra.com/doc/clones/index.html
sorry dude it is a illegal clone, any chance you can get your money back for it.
sorry dude it is a illegal clone, any chance you can get your money back for it.
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: coil on plugs
Is there nothing that can be done with M-Tech over there in the UK?
I have seen far too many guys here on the forum, that have been hosed by those dishonest slime balls!
Ken
I have seen far too many guys here on the forum, that have been hosed by those dishonest slime balls!
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
-
- Site Admin
- Posts: 39585
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: coil on plugs
Yes that's a counterfeit. De-activating user account as per forum policy.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".