Fuel equation precisions and code

monoPerf · Post by **monoPerf** » Wed Oct 15, 2014 4:41 am

Hey,

I would get more details on the software part...

For example, I would know how MS calculator do when it measures an engine speed of 2500 rpm with a load of 25 MAP IF the VE table gives only the value for 2300 rpm & 2600 rpm and for 20 & 28 MAP
PW = REQ_FUEL * VE * MAP * E + accel + Injector_open_time

Where can I find more details of this type on the controllers ? Where can I find the code of the MST unit ?

Thank you for your help !

slow_hemi6 · Post by **slow_hemi6** » Thu Oct 16, 2014 3:46 am

It interpolates between the values entered in the tables.

monoPerf · Post by **monoPerf** » Thu Oct 16, 2014 4:40 am

slow_hemi6 wrote:It interpolates between the values entered in the tables.

Thank's slow_hemi6, it's what I was thinking... And don't you know if the code is accessible freely ?

Good afternoon !

Post by **jsmcortina** » Thu Oct 16, 2014 5:24 am

monoPerf wrote:don't you know if the code is accessible freely ?

The code is available for Megasquirt customers.

James

Megasquirt Support Forum (MSEXTRA)

Fuel equation precisions and code

Fuel equation precisions and code

Re: Fuel equation precisions and code

Re: Fuel equation precisions and code

Re: Fuel equation precisions and code