Hey,
I would get more details on the software part...
For example, I would know how MS calculator do when it measures an engine speed of 2500 rpm with a load of 25 MAP IF the VE table gives only the value for 2300 rpm & 2600 rpm and for 20 & 28 MAP
PW = REQ_FUEL * VE * MAP * E + accel + Injector_open_time
Where can I find more details of this type on the controllers ? Where can I find the code of the MST unit ?
Thank you for your help !
Fuel equation precisions and code
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 4122
- Joined: Fri May 07, 2004 3:33 am
- Location: Australia
Re: Fuel equation precisions and code
It interpolates between the values entered in the tables.
Find the Manuals up top under Quick links: Manuals.
Cheers Luke
Cheers Luke
Re: Fuel equation precisions and code
slow_hemi6 wrote:It interpolates between the values entered in the tables.
Thank's slow_hemi6, it's what I was thinking... And don't you know if the code is accessible freely ?
Good afternoon !
-
- Site Admin
- Posts: 39620
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Fuel equation precisions and code
The code is available for Megasquirt customers.monoPerf wrote:don't you know if the code is accessible freely ?
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".