I am getting timing err... want to check if these are resistive? any info?
~James
Are WR8LCplus super plugs resistor plugs?
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 76
- Joined: Thu Jan 08, 2015 8:33 pm
- Location: Los Angeles
Are WR8LCplus super plugs resistor plugs?
MS3/90' 525iM20B25/H&rsprings/Bilstien Sportshocks/MeyleHD full front suspension kit/M5 aluminum lower control arms/E32 bushings/JL12w6x2/JLSlash1000/1AMP/Wood Grain interior frm540i/GreenLED interior/Halo projector lights/suede uplst/fold out DVD/Soon to be nitrous and turbo
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: Are WR8LCplus super plugs resistor plugs?
Looks like it to me...... The above is a quote from one of their advertisements.Metal glass fused resistor maximizes interference suppression
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
-
- Helpful MS/Extra'er
- Posts: 139
- Joined: Sat Dec 04, 2010 1:49 am
- Location: Melbourne, Australia
- Contact:
Re: Are WR8LCplus super plugs resistor plugs?
Hi. My understanding is that the 'R' stands for resistive, so this plug is a resistive one.
JIm
JIm
1968 Australian Morris Mini fitted with a 1310cc A+ engine
14point7 WB, TunerStudio MS Ultra & MegaLogViewer HD
My Blog: http://www.jims-blog.com
14point7 WB, TunerStudio MS Ultra & MegaLogViewer HD
My Blog: http://www.jims-blog.com
-
- Helpful MS/Extra'er
- Posts: 76
- Joined: Thu Jan 08, 2015 8:33 pm
- Location: Los Angeles
Re: Are WR8LCplus super plugs resistor plugs?
Thx dudes ...
MS3/90' 525iM20B25/H&rsprings/Bilstien Sportshocks/MeyleHD full front suspension kit/M5 aluminum lower control arms/E32 bushings/JL12w6x2/JLSlash1000/1AMP/Wood Grain interior frm540i/GreenLED interior/Halo projector lights/suede uplst/fold out DVD/Soon to be nitrous and turbo
Re: Are WR8LCplus super plugs resistor plugs?
Have you bought them? If so, simply measure the resistance between central electrode and connector. Non resistor will be about 0 ohms, resistor something like a few thousand ohms.panzertank wrote:I am getting timing err... want to check if these are resistive? any info?
~James
Rover SD1 3.5 EFI
MS2 V3
EDIS
Tech Edge O2
London UK.
MS2 V3
EDIS
Tech Edge O2
London UK.
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: Are WR8LCplus super plugs resistor plugs?
FWIW, I can not fathom the concept that plug resistance would have any effect on timing or any attendant error.panzertank wrote:I am getting timing err... want to check if these are resistive?
Just my $.02 of course.....
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance