Are WR8LCplus super plugs resistor plugs?

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
panzertank
Helpful MS/Extra'er
Posts: 76
Joined: Thu Jan 08, 2015 8:33 pm
Location: Los Angeles

Are WR8LCplus super plugs resistor plugs?

Post by panzertank »

I am getting timing err... want to check if these are resistive? any info?

~James
MS3/90' 525iM20B25/H&rsprings/Bilstien Sportshocks/MeyleHD full front suspension kit/M5 aluminum lower control arms/E32 bushings/JL12w6x2/JLSlash1000/1AMP/Wood Grain interior frm540i/GreenLED interior/Halo projector lights/suede uplst/fold out DVD/Soon to be nitrous and turbo :evil:
Top
kjones6039
Super MS/Extra'er
Posts: 1986
Joined: Sat Jul 22, 2006 8:02 pm
Location: Eureka, NV USA
Contact:
Contact kjones6039

Re: Are WR8LCplus super plugs resistor plugs?

Post by kjones6039 »

Metal glass fused resistor maximizes interference suppression
Looks like it to me...... The above is a quote from one of their advertisements.

Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
Top
jb007
Helpful MS/Extra'er
Posts: 139
Joined: Sat Dec 04, 2010 1:49 am
Location: Melbourne, Australia
Contact:
Contact jb007

Re: Are WR8LCplus super plugs resistor plugs?

Post by jb007 »

Hi. My understanding is that the 'R' stands for resistive, so this plug is a resistive one.

JIm
1968 Australian Morris Mini fitted with a 1310cc A+ engine
14point7 WB, TunerStudio MS Ultra & MegaLogViewer HD
My Blog: http://www.jims-blog.com
Top
panzertank
Helpful MS/Extra'er
Posts: 76
Joined: Thu Jan 08, 2015 8:33 pm
Location: Los Angeles

Re: Are WR8LCplus super plugs resistor plugs?

Post by panzertank »

Thx dudes ...
MS3/90' 525iM20B25/H&rsprings/Bilstien Sportshocks/MeyleHD full front suspension kit/M5 aluminum lower control arms/E32 bushings/JL12w6x2/JLSlash1000/1AMP/Wood Grain interior frm540i/GreenLED interior/Halo projector lights/suede uplst/fold out DVD/Soon to be nitrous and turbo :evil:
Top
DaveEFI
Super MS/Extra'er
Posts: 4175
Joined: Sun Apr 15, 2012 12:55 am
Location: SW London, UK

Re: Are WR8LCplus super plugs resistor plugs?

Post by DaveEFI »

panzertank wrote:I am getting timing err... want to check if these are resistive? any info?

~James
Have you bought them? If so, simply measure the resistance between central electrode and connector. Non resistor will be about 0 ohms, resistor something like a few thousand ohms.
Rover SD1 3.5 EFI
MS2 V3
EDIS
Tech Edge O2
London UK.
Top
kjones6039
Super MS/Extra'er
Posts: 1986
Joined: Sat Jul 22, 2006 8:02 pm
Location: Eureka, NV USA
Contact:
Contact kjones6039

Re: Are WR8LCplus super plugs resistor plugs?

Post by kjones6039 »

panzertank wrote:I am getting timing err... want to check if these are resistive?
FWIW, I can not fathom the concept that plug resistance would have any effect on timing or any attendant error.

Just my $.02 of course..... :lol:

Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
Top
Post Reply

Return to “General, New users, Purchasing”