Hello,
I just registered here and want to know if there is a specific section to post questions concerning a newly purchased ms3-pro ecu. Would this fall under ms3, or is there another specific area for these posts?
Also, This ecu will be running an f150 sourced coyote v8 in a 92 mustang [not exactly stock...]. I was reading [and was thrilled to find this] one thread concerning a similar installation but would like to hear from anyone who has done this, just so I know who I should direct any questions at. Thanks for any feedback.
Looking for an engine as we speak...
new user question
Moderators: jsmcortina, muythaibxr
new user question
toy= 92 ford mustang lx hatchback : full SA koni coilovers, torque arm, panhard bar, tubular arms and k member, cobra steering and brakes, autopower race roll bar, schroth 6 point belts, ms3-pro, coyote v8 swap pending...
-
Matt Cramer
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: new user question
The MS3-Pro is supported in the MS3 forum as well as by contacting us directly at websales@diyautotune.com.
Matt Cramer -1966 Dodge Dart slant six running on MS3X