Toyota Scion TC 2az MS1 Wheel Decoder

[alftuning]

Hi guys!
I'm working with a Scion TC 2006 with ms1 v3.0. Im sure the crank wheel is 36-2 but if i move the angle over 20 the car shut off. The car only start and runs only of 0 to 20 of angle. Any idea? Maybe a bad wheel decoder?

Trig pos A = 3
Trig Return pos A = 8
Trig pos B = 21
Trig Return pos B = 26

others = 0

[Matt Cramer]

To get a 60 degree trigger angle, subtract 2 from all the position values.

[alftuning]

So, new values with 2 values subtracted
Trger pos A = 1
Trig return pos A = 6
Trig pos B = 19
Trig return pos B = 24

??? Thanks!

[Matt Cramer]

Correct.

[alftuning]

According with the manual:

Manual wheel pic example


2AZFE Crank Trigger Wheel (Black mark / tooth at TDC)


According with the Mega wheel decoder:

[alftuning]

Im right?

[alftuning]

Anyone?

[Matt Cramer]

The final arbiter of whether your settings are right will be the timing light.