MS3 Extra 3.57-c for sale

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
matthewb
Helpful MS/Extra'er
Posts: 69
Joined: Mon Feb 22, 2010 5:32 pm
Location: Ann Arbor, MI

MS3 Extra 3.57-c for sale

Post by matthewb »

I am selling my MS3 Extra. I was using it to run a 4.6L DOHC engine that I had swapped into a Porsche 944. I had it running ok and put about 5,000 miles on it but have to admit I am not really much of a calibrator. I recently got my hands on a 5.0L coyote and decided to go with the Coyote control pack because of the TIVCT. I originally bought it from DIY autotune. Along with it will come harnesses also from DIY. Most wires were shortened to suitable length for my application but all still have at least a couple of feet, plenty to extend.

Asking $550 + shipping. Open to offers.

Contact me with any questions, I can send photos upon request.

Matt
Ford "5.0 cammer" (not the real one just a stroker kit to my 4.6 liter) in a 1983 Porsche 944
3.57+MS3+Extra Still wiring
glenneaux
MS/Extra Newbie
Posts: 23
Joined: Thu Oct 06, 2005 5:35 pm
Location: Sale, Gippsland, Victoria, Australia

Re: MS3 Extra 3.57-c for sale

Post by glenneaux »

Hi mate. When you say ms3 extra, are you selling an ms3 with a v3.57 board with an ms3x expansion card? Photo wouldd be good...

I take it you're in the US would you happily ship overseas? PayPal?
matthewb
Helpful MS/Extra'er
Posts: 69
Joined: Mon Feb 22, 2010 5:32 pm
Location: Ann Arbor, MI

Re: MS3 Extra 3.57-c for sale

Post by matthewb »

I am really sorry about the delayed response. I didn't have the notification box checked. I believe what I have is what you are describing. Maybe the pictures help clear it up. I am in the U.S. I don't have a problem with shipping overseas as long as we can work out the details. It is not something I am familiar with.
Ford "5.0 cammer" (not the real one just a stroker kit to my 4.6 liter) in a 1983 Porsche 944
3.57+MS3+Extra Still wiring
glenneaux
MS/Extra Newbie
Posts: 23
Joined: Thu Oct 06, 2005 5:35 pm
Location: Sale, Gippsland, Victoria, Australia

Re: MS3 Extra 3.57-c for sale

Post by glenneaux »

How much were you looking to get for it?

Sent from my Nexus 5 using Tapatalk
matthewb
Helpful MS/Extra'er
Posts: 69
Joined: Mon Feb 22, 2010 5:32 pm
Location: Ann Arbor, MI

Re: MS3 Extra 3.57-c for sale

Post by matthewb »

$550 plus shipping. That will include the two harnesses that I have as well. I removed all of the 4.6l connectors, so most wires are shorter than original. Many are still original length. If you are mounting your computer close to the enine, there is a chance you won't have to lengthen the wires, just put on the connectors you need.

The units are currently $659 from DIYautotune. The harnesses are another $79 a piece.

So to get these components new you are looking at $820 plus shipping. I understand these are used but they are in good shape and not used for very long.
Ford "5.0 cammer" (not the real one just a stroker kit to my 4.6 liter) in a 1983 Porsche 944
3.57+MS3+Extra Still wiring
GT6MK3
MS/Extra Newbie
Posts: 28
Joined: Fri Jul 16, 2010 8:39 pm

Re: MS3 Extra 3.57-c for sale

Post by GT6MK3 »

Check your PM's

Craig
matthewb
Helpful MS/Extra'er
Posts: 69
Joined: Mon Feb 22, 2010 5:32 pm
Location: Ann Arbor, MI

Re: MS3 Extra 3.57-c for sale

Post by matthewb »

This is still for sale.
Ford "5.0 cammer" (not the real one just a stroker kit to my 4.6 liter) in a 1983 Porsche 944
3.57+MS3+Extra Still wiring
MannyTercel
MS/Extra Newbie
Posts: 1
Joined: Sat May 21, 2016 10:15 am

Re: MS3 Extra 3.57-c for sale

Post by MannyTercel »

Hello, is this ms3X still available for sale?
matthewb
Helpful MS/Extra'er
Posts: 69
Joined: Mon Feb 22, 2010 5:32 pm
Location: Ann Arbor, MI

Re: MS3 Extra 3.57-c for sale

Post by matthewb »

Yes it is.
Ford "5.0 cammer" (not the real one just a stroker kit to my 4.6 liter) in a 1983 Porsche 944
3.57+MS3+Extra Still wiring
JakeMerkur
MS/Extra Newbie
Posts: 9
Joined: Wed May 25, 2016 9:39 am
Location: Fairview, WV

Re: MS3 Extra 3.57-c for sale

Post by JakeMerkur »

I have a Merkur in Akron area, could do pickup. Where are you located? Call/Text me (304) 322-1555 can pick up cash this weekend if it works for you.
'88 Merkur "DAS OTTO"
'15 Subaru Impreza (DD)
'95 T/A Firehawk T-Tops "The Eternal Project"
matthewb
Helpful MS/Extra'er
Posts: 69
Joined: Mon Feb 22, 2010 5:32 pm
Location: Ann Arbor, MI

Re: MS3 Extra 3.57-c for sale

Post by matthewb »

Still available
Ford "5.0 cammer" (not the real one just a stroker kit to my 4.6 liter) in a 1983 Porsche 944
3.57+MS3+Extra Still wiring
alexk
MS/Extra Newbie
Posts: 1
Joined: Wed Jun 22, 2016 11:19 pm

Re: MS3 Extra 3.57-c for sale

Post by alexk »

HI, Is this unit available for sale ?
matthewb
Helpful MS/Extra'er
Posts: 69
Joined: Mon Feb 22, 2010 5:32 pm
Location: Ann Arbor, MI

Re: MS3 Extra 3.57-c for sale

Post by matthewb »

This is sold.
Ford "5.0 cammer" (not the real one just a stroker kit to my 4.6 liter) in a 1983 Porsche 944
3.57+MS3+Extra Still wiring
Post Reply