Hello, i'm Mark Post from the Netherlands. Just finished building a super seven kitcar with a Ford Blacktop Engine.
Engine starts by the the first test. Ecu is programmed default. I want to drive to the dyno to set everything right. But with the default sttings the car isn't drivable. Can anyone support me with a map so i can drive to the dyno.
It is a =Ford Blacktop 2.0 engine with 45mm throttlebodies.
Thanks in advance.
Greetz Mark
New User > Ford Blacktop 2.0 Kitcar Seven
Moderators: jsmcortina, muythaibxr
Re: New User > Ford Blacktop 2.0 Kitcar Seven
Hi Mark
Best way is to follow the manual on this.
Every engine is different.
You might check this forum on "Blacktop".
Best way is to follow the manual on this.
Every engine is different.
You might check this forum on "Blacktop".