Introducing and asking for help

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
hector_haar
MS/Extra Newbie
Posts: 1
Joined: Thu Oct 13, 2016 4:53 pm

Introducing and asking for help

Post by hector_haar »

Hi everyone, my name is Héctor, I´m from Mexico.
Few months ago I bought a MS2 (I think). Dealer is being so unprofessional and gave me no instruction and support for instalation.
I'm doing my tesis and I need to install and make some test on a CBP VW engine (2.0L 8v 85 kw).
By this moment I have done most of the wiring process and some start testing. Engine started few times, 2 weeks ago, but now it doesn't start.
I'll really appreciate some help, I'm lost and I have to finish this instalation as soon as possible.
Here are some pics that could help to give an idea of what I'm trying to do. (sorry about pics... they are to heavy so I couldn't attached).
Inicial Set up was supposely made by the dealer.
This datalog is completly virgin.. I run it as it was given to my by dealer, so sensors are not calibrated including o2 sensor. Knock is not wired because the megasquirt i'm using does not have that capacity (it's what dealer said)
graph.png
2016-10-19_20.17.47.msl
Post Reply