How do determine plug gap size for ls2 coil conversion

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
jsdevel
Experienced MS/Extra'er
Posts: 318
Joined: Mon May 23, 2016 3:41 pm
Location: Phoenix, AZ

How do determine plug gap size for ls2 coil conversion

Post by jsdevel »

This probably applies to any install replacing a distributor with ls2 coils. In my case, I megasquirted a '91 Volvo 240. Spark plug is NGK BPR6ES with a factory gap of 0.028-0.031 in. How do I determine the proper gap size? Should I use plugs from other vehicles that have LS2 coils?
Top
Matt Cramer
Super MS/Extra'er
Posts: 17507
Joined: Thu Apr 16, 2009 8:08 pm

Re: How do determine plug gap size for ls2 coil conversion

Post by Matt Cramer »

I'd usually start with the stock plug gap.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Top
Post Reply

Return to “General, New users, Purchasing”