Got the car all back together and trying to get the engine going again for the first time after re assembly, I'm positive I have all wires and connectors back the way they were when the engine was running on the test stand.
I have about 225 rpm on the Tunerstudio RPM gauge when cranking but at the bottom of the screen is a flashing red box saying RPM NOT synced. Any advice is appreciated.
Thanks, Chris
Tunerstudio says RPM NOT synced
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 15
- Joined: Mon Aug 01, 2016 10:58 am
- Location: North of Toronto
Tunerstudio says RPM NOT synced
MS2 PCB v3.57 MSrelay board, LC-2 Innovate O2
BMW M6/s38b35 w/6 ITBs
BMW M6/s38b35 w/6 ITBs
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Tunerstudio says RPM NOT synced
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".