New guy saying hi!

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
HOTMOPR
MS/Extra Newbie
Posts: 1
Joined: Thu Aug 24, 2017 9:53 pm

New guy saying hi!

Post by HOTMOPR »

Hi everyone! Jumped it with both feet. Coming from a Big block mopar turbocharged blow thru set up and going to The Ultimate. Its been a challenge to say the least. I have the engine compartment about wired in with the exception of a couple sensors. Looking forward to getting this done!
Matt Cramer
Super MS/Extra'er
Posts: 17507
Joined: Thu Apr 16, 2009 8:08 pm

Re: New guy saying hi!

Post by Matt Cramer »

Welcome! I've got a '66 Dart project myself, but it's a slant six.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
CanadianDuster
MS/Extra Newbie
Posts: 7
Joined: Thu Jun 18, 2015 1:06 pm

Re: New guy saying hi!

Post by CanadianDuster »

Welcome. This forum is great. Mopar or No car.
64 Plymouth Savoy
MS2 3.57 Ver.3.4.0 from DIYAutoTune - 505 C.I. - Cross Ram dual FAST TBI - Tremec 5 SPD. - 36-1 Pick up - Batch Fire - Mopar Dist. MSD 6AL controlled by MS2 - Spartan 2 WBO2
BigBlockMopar
Experienced MS/Extra'er
Posts: 372
Joined: Sat Dec 31, 2011 6:10 am
Location: Netherlands
Contact:

Re: New guy saying hi!

Post by BigBlockMopar »

What's a Mopar?!?!!1!

Welcome!
Daily driver: 1973 Dodge Dart - 360ci engine - 11.3:1cr - MS3x - ignition only. 42RH/A500 OD+LU transmission / 3.23 gears
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
jsimmons
Experienced MS/Extra'er
Posts: 207
Joined: Wed Jun 10, 2015 10:12 pm

Re: New guy saying hi!

Post by jsimmons »

Welcome, i think you'll find a ton of useful info and help around here. Tons of smart users that dobt mind helping dumb people like myself lol
R100RT
Super MS/Extra'er
Posts: 1039
Joined: Thu Jun 30, 2011 12:45 pm
Location: British Columbia

Re: New guy saying hi!

Post by R100RT »

Excellent, more turbo's! (on MS of course)
Matt, when you going to have that Slant 6 finished?
1983 BMW R100RT Motorbike
Turbocharged - Water/Meth
Sequential Ignition & Fuel
"Perky Sleeper" that excites bike enthusiasts once discovered (or being passed)
Newest project - 1995 BMW K75 is V3 Microsquirt, "Turbocharger - Of Course"
Matt Cramer
Super MS/Extra'er
Posts: 17507
Joined: Thu Apr 16, 2009 8:08 pm

Re: New guy saying hi!

Post by Matt Cramer »

R100RT wrote:Excellent, more turbo's! (on MS of course)
Matt, when you going to have that Slant 6 finished?
Right now it cranks up and idles, but I need to patch an oil leak, finish the exhaust, and a few more details before I can throw it on the dyno. I might add that 8 3/4" rear axle I have sitting around before dyno tuning as I don't know how long that 7 1/4" rear is going to last, even on a chassis dyno.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Post Reply