No rpm signal
Moderators: jsmcortina, muythaibxr
No rpm signal
I'm new here and dont know if this is where I should be asking this question. So I have a microsquirt and it was running fine then some how the tune and firmware got corrupted. Sent it back and the reloaded the firmware and said it was good. I reinstalled it and now I have no rpm signal. Amy help would be greatly appreciated. I have tried another rpm source and still didn't see rpm. Its on a airboat . and I'm getting the rpm signal from magnetos.
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: No rpm signal
Try checking the resistance on R20 inside the MicroSquirt and make sure it isn't blown.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: No rpm signal
thats what it was. ty