*New User* Hello from Trinidad (FB RX7 inside)

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
Razkal
MS/Extra Newbie
Posts: 3
Joined: Wed Sep 27, 2017 6:55 am

*New User* Hello from Trinidad (FB RX7 inside)

Post by Razkal »

[img]13439025_1055972501159805_2250640819494865081_n.jpg[/img]
[img]13439025_1055972501159805_2250640819494865081_n.jpg[/img]
[img]13439025_1055972501159805_2250640819494865081_n.jpg[/img]

Sorry to disappoint (ie no rotary), but i bought this 1984 GSL-SE with an RB20ET a couple years ago. I do alot of autocross/solo racing, daily drive it and attend any track days that i can participate in.
I've tinkered with bolt-ons and piggy backs before and finally have it running reliably with a good tune on an MS3 unit (supplied and installed by a local dealer/tuner).

Mod List as follows:
-OEM head and block
-Oem 185cc injectors
-MSD 8204 coil
-044 fuel pump
-FMIC/CAI/3" turbo-back free-flow exhaust
-S14 T28 Turbo on oem T2-flanged manifold
-38mm Tial external wg
-S14 Gbox/FC subframes

I've decided to join the support forums to learn more about the system and using it myself, as well as to understand how to put together a 3rd party android display dash and any of the many upgrades i can eventually do to both.

Since i havent had any hands on experience with using the MS3 (dont have a laptop with TunerStudio yet or an Android display/logger dash), i have no .MSQ file to share (yet).

Cant Seem to find a softcopy of my last dynosheet, but its put down 210whp/200ft/lbs @ 14psi.
Hoping to either upgrade injectors to Evo1-3 units (drop in on my rail and harness) and/or some water/meth injection before my next tune attempt.

Cheers All!
Looking forward to learning lots.

Raz.
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: *New User* Hello from Trinidad (FB RX7 inside)

Post by Matt Cramer »

Welcome! That's not a swap you see very often.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Razkal
MS/Extra Newbie
Posts: 3
Joined: Wed Sep 27, 2017 6:55 am

Re: *New User* Hello from Trinidad (FB RX7 inside)

Post by Razkal »

Matt Cramer wrote:Welcome! That's not a swap you see very often.
Thanks man.

Gonna go poke around the forums a bit, I got questions, hopefully threads exist.
Matches
MS/Extra Newbie
Posts: 12
Joined: Mon Sep 25, 2017 9:41 am

Re: *New User* Hello from Trinidad (FB RX7 inside)

Post by Matches »

That's super rad
Post Reply