Accelerometer input for vibration analysis?

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Accelerometer input for vibration analysis?

Postby TheMonkey » Tue Nov 21, 2017 1:30 am

Searched didn’t see discussion yet.

Playing around with an app on iPhone to measure vibrations. It sees them all with amplitude, frequency on all 3 axis. Super sensitive.

Some sluething can diagnose what’s out of balance, just need to match rpms of diff components and then figure first or second order vibes.

There’s an app that will do all the calcs and sleuthing NVH vibration analysis but it’s $400.

I did it manually with free vibration app, My issue is keeping speed steady and noted so sample can be matched with rpms. And hand calculate.

Mine was wheel out of balance and I would have SWORN they were good, I would have bet driveline.

But.... why not put an accelerometer into ms3 box or wired in with nvh type analysis tied into ms interface? Possible? I imagine. Just thought I’d throw it out there, I’m not sure I’m the guy to figure out how to make it happen, but thought I’d share the idea.
__________________________
MSIIIx V3.0 Big Poncho - Sequential fuel and ignition
Sequencer running an '80 635csi Euro M90 - Sequential fuel and ignition
TheMonkey
Experienced MS/Extra'er
 
Posts: 195
Joined: Wed Mar 26, 2008 5:48 pm

Return to General, New users, Purchasing

Who is online

Users browsing this forum: Bing [Bot] and 2 guests