MegaTune for MS1 Extra
-
- Master MS/Extra'er
- Posts: 835
- Joined: Sun May 02, 2004 2:16 pm
- Location: Norwich UK
- Contact:
MegaTune for MS1 Extra
this is a link to an installer specifically for use with the latest MS-Extra code release (029t) it has the manual, the firmware and MegaTune options for Speed Density, Alpha, 400KPa, MAF, etc, so no messing with ini files, etc,
http://www.extraefi.co.uk/software/Mega ... taller.exe
Phil
http://www.extraefi.co.uk/software/Mega ... taller.exe
Phil
Last edited by daxtojeiro on Mon Jan 01, 2007 12:09 pm, edited 1 time in total.
http://www.msextra.com/manuals/MS_Extra ... _Index.htm for MS1 Extra Manuals
http://www.msextra.com/ms2extra/ for MS2-Extra Manuals
http://www.extraefi.co.uk/cobra/accobra.htm 5.0L TVR powered Cobra Replica (MSnS-E)
-
- Master MS/Extra'er
- Posts: 835
- Joined: Sun May 02, 2004 2:16 pm
- Location: Norwich UK
- Contact:
Its MT 2.25 and 029t code,
Phil
Phil
http://www.msextra.com/manuals/MS_Extra ... _Index.htm for MS1 Extra Manuals
http://www.msextra.com/ms2extra/ for MS2-Extra Manuals
http://www.extraefi.co.uk/cobra/accobra.htm 5.0L TVR powered Cobra Replica (MSnS-E)
-
- Master MS/Extra'er
- Posts: 835
- Joined: Sun May 02, 2004 2:16 pm
- Location: Norwich UK
- Contact:
the 029t code is installed with megatune, if you look in START - PROGRAM FILES - MEGASQUIRT the downloader will be in there and the code is installed in c:/programfiles/megasquirt/029t/
Phil
Phil
http://www.msextra.com/manuals/MS_Extra ... _Index.htm for MS1 Extra Manuals
http://www.msextra.com/ms2extra/ for MS2-Extra Manuals
http://www.extraefi.co.uk/cobra/accobra.htm 5.0L TVR powered Cobra Replica (MSnS-E)
-
- Site Admin
- Posts: 533
- Joined: Tue Dec 28, 2004 11:33 pm
- Location: Grove City, OH - USA
- Contact:
I was wondering if at all possible could there be an indicator of some sort they lets the user know if information is being burnt to the ECU and when it has completed. For instance, in the Constants page, when I burn the values, that screen seems to take a good while. I guess a user could just wait 10 seconds or so and assume that the information has been burt, but I figured if it was possible for a visual that'd be helpful.
I notice at the bottom of MegaTune there is a "SAVED" text box, but I'm not sure if that applies to a saved MSQ, log file, or saved values to the ECU.
I notice at the bottom of MegaTune there is a "SAVED" text box, but I'm not sure if that applies to a saved MSQ, log file, or saved values to the ECU.
1997 Turbo Saturn
MS3 v0.22
TunerStudio v[insert_current_version_here]
MS3 v0.22
TunerStudio v[insert_current_version_here]
-
- Master MS/Extra'er
- Posts: 835
- Joined: Sun May 02, 2004 2:16 pm
- Location: Norwich UK
- Contact:
Hi there,
if MeagTune allows you control of the tabs then it has sent the info, i.e. whilst burning it doesnt allow anything to be changed, well thats the way I understand it anyhow MegaTunix has a RED area that shows you havent burnt the info and then BLACK when you have, may be give that a try it has some really cool new gismo's in it now too,
Phil
if MeagTune allows you control of the tabs then it has sent the info, i.e. whilst burning it doesnt allow anything to be changed, well thats the way I understand it anyhow MegaTunix has a RED area that shows you havent burnt the info and then BLACK when you have, may be give that a try it has some really cool new gismo's in it now too,
Phil
http://www.msextra.com/manuals/MS_Extra ... _Index.htm for MS1 Extra Manuals
http://www.msextra.com/ms2extra/ for MS2-Extra Manuals
http://www.extraefi.co.uk/cobra/accobra.htm 5.0L TVR powered Cobra Replica (MSnS-E)
-
- Site Admin
- Posts: 533
- Joined: Tue Dec 28, 2004 11:33 pm
- Location: Grove City, OH - USA
- Contact:
Yeh I've noticed that in some areas whenever you burn code, everything is frozen until everything has been burnt completely. Under the constants page, you can burn everything and for me it takes about 15 seconds. While in the burning process, it lets me close out of the Constants page, but of course the gauges are still frozen until it's all been successful.
I just figured it might be a little helpful, even though there is a way to tell by the delay of tabs, etc. I think I will have to try out MegaTunix though. It's been a very long time since I've tried it and I'm sure it's improved greatly.
I just figured it might be a little helpful, even though there is a way to tell by the delay of tabs, etc. I think I will have to try out MegaTunix though. It's been a very long time since I've tried it and I'm sure it's improved greatly.
1997 Turbo Saturn
MS3 v0.22
TunerStudio v[insert_current_version_here]
MS3 v0.22
TunerStudio v[insert_current_version_here]
-
- Master MS/Extra'er
- Posts: 835
- Joined: Sun May 02, 2004 2:16 pm
- Location: Norwich UK
- Contact:
Yeah, a lot has changed, even since I made this a lot has been added:tristanlee85 wrote:Yeh I've noticed that in some areas whenever you burn code, everything is frozen until everything has been burnt completely. Under the constants page, you can burn everything and for me it takes about 15 seconds. While in the burning process, it lets me close out of the Constants page, but of course the gauges are still frozen until it's all been successful.
I just figured it might be a little helpful, even though there is a way to tell by the delay of tabs, etc. I think I will have to try out MegaTunix though. It's been a very long time since I've tried it and I'm sure it's improved greatly.
http://www.youtube.com/watch?v=CLlnJAyzIfQ
Phil
http://www.msextra.com/manuals/MS_Extra ... _Index.htm for MS1 Extra Manuals
http://www.msextra.com/ms2extra/ for MS2-Extra Manuals
http://www.extraefi.co.uk/cobra/accobra.htm 5.0L TVR powered Cobra Replica (MSnS-E)
Phil,
could you update the installer to the 029v code? Thanks,
Jim
[EDIT] My bad, the installer is updated, the first post isn't.
could you update the installer to the 029v code? Thanks,
Jim
[EDIT] My bad, the installer is updated, the first post isn't.
The man behind MS Labs
2005 Audi A3 2.0L TFSI DSG AWD - Extreme MS3
2002 Mazda Miata 1.8 6sp - Enhanced MS3 1.4.0, sequential injection, sequential ignition, big turbo, lots of boost
2005 Audi A3 2.0L TFSI DSG AWD - Extreme MS3
2002 Mazda Miata 1.8 6sp - Enhanced MS3 1.4.0, sequential injection, sequential ignition, big turbo, lots of boost
-
- Helpful MS/Extra'er
- Posts: 78
- Joined: Mon Sep 27, 2004 3:39 pm
- Location: Croydon, UK
- Contact:
Possible bug in Megatune installer
Phil,
I just tried to install the latest version of Megatune from this thread onto my new computer and my spyware programme (Pest Patrol) tells me that your installer file is corrupted with a spyware bug called "a-spy V2.12"
More info on the bug can be found here:
http://www.ca.com/securityadvisor/pest/ ... =453101425
Now, I'm not sure whether this is a valid alarm or not because Symantec Corporate Edition didn't pick it up but I thought I had better point it out in case we are compromising anyone's machine.
Regards,
Bob
I just tried to install the latest version of Megatune from this thread onto my new computer and my spyware programme (Pest Patrol) tells me that your installer file is corrupted with a spyware bug called "a-spy V2.12"
More info on the bug can be found here:
http://www.ca.com/securityadvisor/pest/ ... =453101425
Now, I'm not sure whether this is a valid alarm or not because Symantec Corporate Edition didn't pick it up but I thought I had better point it out in case we are compromising anyone's machine.
Regards,
Bob
Are you sure thats big enough to sit in?
MG Midget 1500 EFI 5 speed
Running MSExtra 029y4 on MS1 V2.2
MG Midget 1500 EFI 5 speed
Running MSExtra 029y4 on MS1 V2.2
-
- MS/Extra Newbie
- Posts: 11
- Joined: Mon Jan 07, 2008 11:20 am
- Location: Lincoln, NE
-
- Site Admin
- Posts: 533
- Joined: Tue Dec 28, 2004 11:33 pm
- Location: Grove City, OH - USA
- Contact:
Hi Phil,
The link to the 29t installer doesn't work anymore, can you pls send me a copy to :
koffeejava@yahoo.com
I had been using 29t eversince it was release, till my laptop crashed recently.
Thanks in advance.
speedy
The link to the 29t installer doesn't work anymore, can you pls send me a copy to :
koffeejava@yahoo.com
I had been using 29t eversince it was release, till my laptop crashed recently.
Thanks in advance.
speedy
-
- Site Admin
- Posts: 533
- Joined: Tue Dec 28, 2004 11:33 pm
- Location: Grove City, OH - USA
- Contact:
Re: MegaTune for MS1 Extra
Does anyone have a working link to this?
1997 Turbo Saturn
MS3 v0.22
TunerStudio v[insert_current_version_here]
MS3 v0.22
TunerStudio v[insert_current_version_here]
Re: MegaTune for MS1 Extra
MegaTune link is in the MS manual:
http://www.msextra.com/manuals/MS_Extra ... m#download
http://www.msextra.com/manuals/MS_Extra ... m#download