Could someone please explain what the change from P1 to P3 mean, and it is possible to open up an older Tune file for working and modifying tunning etc on P3 if it was ususally done of P1 ?
I am a tad confused around the fundemental changes and the consequences of mixing older files etc, I may use say 2x laptops one with P1 and one with P3, can I use files back and forth on both ?
Hope this makes sense !
Nigel
MT 2.25 P1 vs 2.25 P3
-
- Helpful MS/Extra'er
- Posts: 87
- Joined: Sat Feb 25, 2006 10:27 am
- Location: Costa Del Haslemere UK
MT 2.25 P1 vs 2.25 P3
on http://www.LR4x4.com (Land Rover forum post under Hybrid_From_Hell)
http://www.megasquirt-v8.co.uk On line webshop for all things V8 .....Particularly V8 Rover and Megasquirty
http://www.megasquirt-v8.co.uk On line webshop for all things V8 .....Particularly V8 Rover and Megasquirty
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MT 2.25 P1 vs 2.25 P3
The differences between P1 and P3 are within the mechanics of Megatune itself.
There were no release notes on the different Px versions of Megatune as far as I'm aware, so few people know what actually changed.
The menus and file compatability are a totally different issue and are controlled by the "ini" file that you use and are not affected in any way by the sub-release of Megatune that you use.
James
There were no release notes on the different Px versions of Megatune as far as I'm aware, so few people know what actually changed.
The menus and file compatability are a totally different issue and are controlled by the "ini" file that you use and are not affected in any way by the sub-release of Megatune that you use.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: MT 2.25 P1 vs 2.25 P3
I'm running P1. The changes are outllined on one of the threads that I did not find.
The changes are few. One change is that you can select and change multiple cells in a fuel table.
The changes are few. One change is that you can select and change multiple cells in a fuel table.