I must be dense. The manuals say the duty cycle adjustment is on the constants page. I cant find it. Its not in injector settings or any engine pages. Am I missing something? Where is it?
Thanks! Sorry for my noobishness.
EDIT: After some reading it looks like I'm misunderstanding the manual. When it says to adjust the PWM duty cycle down, it's talking about the current limit percentage, right?
Cant find duty cycle page/settings?
-
- MS/Extra Newbie
- Posts: 18
- Joined: Mon Jul 06, 2009 1:05 pm
-
- Super MS/Extra'er
- Posts: 1004
- Joined: Thu Feb 16, 2006 6:18 am
- Location: George, South Africa
Re: Cant find duty cycle page/settings?
Correct. The lower the PWM % the shorter the "on" time during PWM, the lesser the holding current.
Kind regards
Philip
'74 Jensen Interceptor 440ci (EFI'ed with MS2 and wasted spark + GM 4L60e GPIO controlled - both on Extra FW)
Philip
'74 Jensen Interceptor 440ci (EFI'ed with MS2 and wasted spark + GM 4L60e GPIO controlled - both on Extra FW)