problems turning off over run fuel cut

Questions specific to Megatune. (Only about the tuning software, not about MS1/MS2 code or code features)
Note that Megatune is obsolete.

problems turning off over run fuel cut

Postby alfanatiker » Fri May 29, 2015 2:17 am

I just started using my MS3X last Sunday, and yesterday I started with the autotune function. But I can't get off the over run fuel cut. It looks like it's of, but still my lambda shows 22,4 on overrun above 2000rpm and kpa lower than 35 (the numbers I put in there). This makes the autotune to increase the VE to stupid high on my lower points on the fuel table. 3100rpm and 40-30kpa for instance now getting up to 90% VE...
alfanatiker
MS/Extra Newbie
 
Posts: 11
Joined: Thu May 28, 2015 12:19 am

Re: problems turning off over run fuel cut

Postby Matt Cramer » Fri May 29, 2015 5:46 am

:msq:
Matt Cramer
Super MS/Extra'er
 
Posts: 13743
Joined: Thu Apr 16, 2009 8:08 pm

Re: problems turning off over run fuel cut

Postby LT401Vette » Fri May 29, 2015 6:12 am

Are you actually using TunerStudio, not MegaTune? (I assume so as MegaTune doesn't support MS3)
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
User avatar
LT401Vette
Super MS/Extra'er
 
Posts: 10409
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC

Re: problems turning off over run fuel cut

Postby alfanatiker » Fri May 29, 2015 9:11 am

Sorry. Of course I´m using tunerstudio. I´ve started the same topic on the right place. Also I included a msq-file from the current tune.

viewtopic.php?f=122&t=58892
alfanatiker
MS/Extra Newbie
 
Posts: 11
Joined: Thu May 28, 2015 12:19 am


Return to Megatune (obsolete)

Who is online

Users browsing this forum: No registered users and 4 guests