I ordered the PWM IAC control mod kit from DIYAutotune and need some clarification on the diode wiring for "fly-back" purposes.
Its worded as needing to be wired across the valve, is my illustration correct?
Ford Mustang IAC wiring question
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 43
- Joined: Thu Jul 08, 2004 2:34 pm
- Location: Farmington, NM
- Contact:
Ford Mustang IAC wiring question
1993 Mustang LX 5.0
MSnS MS1 V3.0 029V
MSnS MS1 V3.0 029V
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
-
- Master MS/Extra'er
- Posts: 666
- Joined: Tue Aug 17, 2004 9:56 pm
- Location: Victoria B.C. Canada
- Contact:
Ok I've done that part about the TIP 122 but do I also need to add the DIODE in there Isn't there one already on the PCB for that It doesn't say anything like that I don't think in here http://www.msextra.com/manuals/MS_Extra ... .htm#FidleMatt Cramer wrote:I believe he's talking about our MK-PWMIAC.
'65 VW Bus with a Subaru EJ20 Turbo conversion , Air to water I/C , LS coils , 14Point7 Spartan 2 & Solid Air Fuel Ratio 52mm gauge.
MS2 Extra V3.0 board
MS2 Extra V3.0 board
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm