Huey wrote:Peter Florance wrote:oops, how do I set time and date?
Move dip switch_1 to setting mode and connect your PC. Run Hyperterminal or the parallax serial terminal program at the same baud rate that is set with dip switch_2. Hit any key and a screen should pop up with all available settings. You may have to switch SW4 to swap transmit and receive on the serial port.
I'll try that.
I got a *.FRD file to save, but TunerStudio does not seem to like to convert it. Not sure I had decent MSQ (3.03s) loaded (desktop PC) so I'll try it again.