1.04 to 1.19 question
Moderator: LT401Vette
-
- Super MS/Extra'er
- Posts: 1281
- Joined: Thu Aug 19, 2010 6:22 pm
- Location: White House, TN USA
1.04 to 1.19 question
I would like to try 1.19. Current: MS2 Extra 3.1.1 TS 1.04. I went to your site and downloaded the 1.19 and it created another TS with icon. Do I load my current tune then power off and then bring the controller on line. Thanks, David
1976 Datsun 280Z L28ET Garrett GT35R T3-T04E stage3 50 trim 63 A/R housing custom grind cam 2000-6000 rpm 440cc injectors intercooled 18 lbs. boost
3" exhaust turbo back LC-1 o2 sensor Hallman manual boost controller EDIS 6 ignition batch fire 60mm throttle body 5 spd T5 borg warner 3.54 lsd
3" exhaust turbo back LC-1 o2 sensor Hallman manual boost controller EDIS 6 ignition batch fire 60mm throttle body 5 spd T5 borg warner 3.54 lsd
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: 1.04 to 1.19 question
That will work, but I would create a new project in 1.19 and load my current tune to that project. That way your tune will also be saved if you want to go back to 1.04......turbo conversion wrote:I would like to try 1.19. Current: MS2 Extra 3.1.1 TS 1.04. I went to your site and downloaded the 1.19 and it created another TS with icon. Do I load my current tune then power off and then bring the controller on line. Thanks, David
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
-
- Super MS/Extra'er
- Posts: 1281
- Joined: Thu Aug 19, 2010 6:22 pm
- Location: White House, TN USA
Re: 1.04 to 1.19 question
Thank you Ken, that is what I will do. Also, how do you get my post to apear in your response? David
1976 Datsun 280Z L28ET Garrett GT35R T3-T04E stage3 50 trim 63 A/R housing custom grind cam 2000-6000 rpm 440cc injectors intercooled 18 lbs. boost
3" exhaust turbo back LC-1 o2 sensor Hallman manual boost controller EDIS 6 ignition batch fire 60mm throttle body 5 spd T5 borg warner 3.54 lsd
3" exhaust turbo back LC-1 o2 sensor Hallman manual boost controller EDIS 6 ignition batch fire 60mm throttle body 5 spd T5 borg warner 3.54 lsd
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: 1.04 to 1.19 question
By clicking the "QUOTE" button at the top right of your post.turbo conversion wrote:Thank you Ken, that is what I will do. Also, how do you get my post to apear in your response? David
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance