I am a pretty capable software engineer, and I'd love to volunteer my services
I have developed on/for many pieces of hardware, and write code in multiple languages (including native assembly for various archs).
I have only been reading on MS for 2 hours, so I'm not sure at all what would be helpful / what needs work.
I've read the FAQ and a few stickies, hopefully i'm not breaking any rules here I missed.
I do not currently have any megasquirt hardware, hopefully I'll have $ for some soon.
If anyone has suggestions, do tell
Possible Projects:
Full in-dash integration w/ touchscreen, running on Pandaboard (ARMv7-a SMP running Linux or Android/Linux)
MS2 on Ford i6-200, dual profiles: performance/gas saver?
MS3 on Drag Car: SBF 351w w/ GT45 turbo, water/meth injection, MSD Ignition && Boost Retard
MS3 Development, volunteer
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 1
- Joined: Fri Jan 20, 2012 7:08 pm
Re: MS3 Development, volunteer
Develop an arduino libray for MS2/3 CAN communication support, and lots of people could have cheap dashboard displays.
1999 Dakota 5.9L R/T-
MSIIe 3.1.2 Batch Fuel/MSD single coil dizzy/Stepper idle
LC-1
MSIIe 3.1.2 Batch Fuel/MSD single coil dizzy/Stepper idle
LC-1
-
- Master MS/Extra'er
- Posts: 685
- Joined: Mon Aug 25, 2008 11:37 pm
- Location: Montreal, Quebec
Re: MS3 Development, volunteer
Help me make my bluetooth adaptor works on my home made display
1993 Chevrolet Cavalier Z24
3400 Turbocharged Inter-cooled
MS3 v3.57+MS3X
3400 Turbocharged Inter-cooled
MS3 v3.57+MS3X