Megasquirt MSEXTRA / MS3EFI

by **aut0m4tic1** » Mon Feb 13, 2012 10:42 pm

I just built a DIYPNP for my turbo 93 accord f22a6. In the setup page for the honda http://www.diyautotune.com/diypnp/apps/n76/usdm-honda-civic-9295-d16z6-mt.html it has me hook up inj1 and inj2 to the ecu connector. Does this mean I need to use Bank2 under injector characteristics?
Thanks in advance for any help
Cory

by **jsmcortina** » Tue Feb 14, 2012 5:05 am

Only if you have a different type of injector connected to bank 2.
That's why it is called "Different bank 2 setting"

James

by **aut0m4tic1** » Tue Feb 14, 2012 11:36 am

James:
Thanks for the quick reply. New to megasquirt here and just wanted to make sure. I hope to do a writeup on my accord when Im done so others dont have to do all the same work Ive had to.
Thanks again
Cory.

by **M30guy** » Tue Feb 28, 2012 3:22 am

What would this be used for?

by **jsmcortina** » Tue Feb 28, 2012 3:26 am

As I wrote here.

jsmcortina wrote:Only if you have a different type of injector connected to bank 2.
That's why it is called "Different bank 2 setting"

James

by **M30guy** » Tue Feb 28, 2012 4:26 pm

So on a 6cyl
3 injectors are 42# and the other 3 could be 60#?

Just curious who would use something like that or what it's for.

by **dontz125** » Tue Feb 28, 2012 4:41 pm

A setup like this would be used in a staged injection arrangement; the smaller injectors would usually be the "low-speed" set, with the larger set adding in somewhere closer to WFO.

Megasquirt MSEXTRA / MS3EFI

Do I need to use Injector Bank2 in TS

Do I need to use Injector Bank2 in TS

Re: Do I need to use Injector Bank2 in TS

Re: Do I need to use Injector Bank2 in TS

Re: Do I need to use Injector Bank2 in TS

Re: Do I need to use Injector Bank2 in TS

Re: Do I need to use Injector Bank2 in TS

Re: Do I need to use Injector Bank2 in TS

Who is online