Do I need to use Injector Bank2 in TS

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
aut0m4tic1
Experienced MS/Extra'er
Posts: 201
Joined: Mon Feb 06, 2012 12:32 pm
Location: Layton, Utah

Do I need to use Injector Bank2 in TS

Post by aut0m4tic1 »

I just built a DIYPNP for my turbo 93 accord f22a6. In the setup page for the honda http://www.diyautotune.com/diypnp/apps/ ... z6-mt.html it has me hook up inj1 and inj2 to the ecu connector. Does this mean I need to use Bank2 under injector characteristics?
Thanks in advance for any help
Cory
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Do I need to use Injector Bank2 in TS

Post by jsmcortina »

Only if you have a different type of injector connected to bank 2.
That's why it is called "Different bank 2 setting"

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
aut0m4tic1
Experienced MS/Extra'er
Posts: 201
Joined: Mon Feb 06, 2012 12:32 pm
Location: Layton, Utah

Re: Do I need to use Injector Bank2 in TS

Post by aut0m4tic1 »

James:
Thanks for the quick reply. New to megasquirt here and just wanted to make sure. I hope to do a writeup on my accord when Im done so others dont have to do all the same work Ive had to.
Thanks again
Cory.
M30guy
Experienced MS/Extra'er
Posts: 361
Joined: Fri Jul 10, 2009 2:43 pm
Location: West coast USA.

Re: Do I need to use Injector Bank2 in TS

Post by M30guy »

What would this be used for?
Ms2-3.4.2 v3.0 .
Turbo BMW m30b35.
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Do I need to use Injector Bank2 in TS

Post by jsmcortina »

As I wrote here.
jsmcortina wrote:Only if you have a different type of injector connected to bank 2.
That's why it is called "Different bank 2 setting"

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
M30guy
Experienced MS/Extra'er
Posts: 361
Joined: Fri Jul 10, 2009 2:43 pm
Location: West coast USA.

Re: Do I need to use Injector Bank2 in TS

Post by M30guy »

So on a 6cyl
3 injectors are 42# and the other 3 could be 60#?

Just curious who would use something like that or what it's for.
Ms2-3.4.2 v3.0 .
Turbo BMW m30b35.
dontz125
Super MS/Extra'er
Posts: 4200
Joined: Mon May 11, 2009 7:14 pm
Location: York, ON
Contact:

Re: Do I need to use Injector Bank2 in TS

Post by dontz125 »

A setup like this would be used in a staged injection arrangement; the smaller injectors would usually be the "low-speed" set, with the larger set adding in somewhere closer to WFO.
QuadraMAP Sensor Module -- PWM-to-Stepper Controller -- Dual Coil Driver
Coming soon: OctoMAP Sensor Module
TTR Ignition Systems
Post Reply