Issue with ECU field definitions on MS3 Batch Injection
Moderator: LT401Vette
Issue with ECU field definitions on MS3 Batch Injection
Running 3.06
I am Logging MS3 and am NOT running sequential injection currently. When set to Auto detect, I get errors on instantMPG as well as other calcs because ML appears to be assuming I am running sequential injection. Tried manually setting field ECu definitions to Megasquirt, but that throws and GEGO error when trying to load VE analyze (I am assuming because they are not MS3 defs). Thoughts?
Also, The instant MPG calcs do not appear to be taking into consideration Fuel Cut. I guess I could add a range limit. Thoughts? I can post a log if necessary.
Thanks,
Shawn
I am Logging MS3 and am NOT running sequential injection currently. When set to Auto detect, I get errors on instantMPG as well as other calcs because ML appears to be assuming I am running sequential injection. Tried manually setting field ECu definitions to Megasquirt, but that throws and GEGO error when trying to load VE analyze (I am assuming because they are not MS3 defs). Thoughts?
Also, The instant MPG calcs do not appear to be taking into consideration Fuel Cut. I guess I could add a range limit. Thoughts? I can post a log if necessary.
Thanks,
Shawn
'90 Corrado G60 on MSns -e -> MS3 - '62 Harley Panhead
Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002
Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002
Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
Re: Issue with ECU field definitions on MS3 Batch Injection
Using Batch Alternating, not full Batch.
'90 Corrado G60 on MSns -e -> MS3 - '62 Harley Panhead
Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002
Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002
Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Issue with ECU field definitions on MS3 Batch Injection
Autodetect what?
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 12731
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Issue with ECU field definitions on MS3 Batch Injection
Auto detect Field Mappings I assume..jsmcortina wrote:Autodetect what?
James
As the Log Field naming changes between firmwares and what not, MegaLogViewer 3.0 by default looks at the header names in each log at open and maps it to a field map so that all the calculated fields work.
sdezego,
Can you post a short data log just to be sure I am working with the same fields as you.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Re: Issue with ECU field definitions on MS3 Batch Injection
Sure, here is a log.
'90 Corrado G60 on MSns -e -> MS3 - '62 Harley Panhead
Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002
Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002
Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
Re: Issue with ECU field definitions on MS3 Batch Injection
Let me know if there is anything else I can provide or help in any way.
Regards,
Shawn
Regards,
Shawn
'90 Corrado G60 on MSns -e -> MS3 - '62 Harley Panhead
Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002
Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002
Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
-
- Super MS/Extra'er
- Posts: 12731
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Issue with ECU field definitions on MS3 Batch Injection
Nope, that did it...
I created a new Field map for non sequential MS3 1.1+. So it will be in the next release.
That formula seems Ok currently if you switch from Manual to MegaSquirt, but then ego_corr is wrong.
I created a new Field map for non sequential MS3 1.1+. So it will be in the next release.
That formula seems Ok currently if you switch from Manual to MegaSquirt, but then ego_corr is wrong.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Re: Issue with ECU field definitions on MS3 Batch Injection
Ok, thanks!
'90 Corrado G60 on MSns -e -> MS3 - '62 Harley Panhead
Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002
Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002
Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m