Issue with ECU field definitions on MS3 Batch Injection

Questions specific to Megalogviewer

Moderator: LT401Vette

Post Reply
sdezego
Helpful MS/Extra'er
Posts: 96
Joined: Sat Jan 07, 2006 8:50 pm
Location: Orlando
Contact:

Issue with ECU field definitions on MS3 Batch Injection

Post by sdezego »

Running 3.06

I am Logging MS3 and am NOT running sequential injection currently. When set to Auto detect, I get errors on instantMPG as well as other calcs because ML appears to be assuming I am running sequential injection. Tried manually setting field ECu definitions to Megasquirt, but that throws and GEGO error when trying to load VE analyze (I am assuming because they are not MS3 defs). Thoughts?

Also, The instant MPG calcs do not appear to be taking into consideration Fuel Cut. I guess I could add a range limit. Thoughts? I can post a log if necessary.

Thanks,
Shawn
'90 Corrado G60 on MSns -e -> MS3 - '62 Harley Panhead

Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002

Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
sdezego
Helpful MS/Extra'er
Posts: 96
Joined: Sat Jan 07, 2006 8:50 pm
Location: Orlando
Contact:

Re: Issue with ECU field definitions on MS3 Batch Injection

Post by sdezego »

Using Batch Alternating, not full Batch.
'90 Corrado G60 on MSns -e -> MS3 - '62 Harley Panhead

Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002

Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Issue with ECU field definitions on MS3 Batch Injection

Post by jsmcortina »

Autodetect what?

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Issue with ECU field definitions on MS3 Batch Injection

Post by LT401Vette »

jsmcortina wrote:Autodetect what?

James
Auto detect Field Mappings I assume..
As the Log Field naming changes between firmwares and what not, MegaLogViewer 3.0 by default looks at the header names in each log at open and maps it to a field map so that all the calculated fields work.

sdezego,
Can you post a short data log just to be sure I am working with the same fields as you.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
sdezego
Helpful MS/Extra'er
Posts: 96
Joined: Sat Jan 07, 2006 8:50 pm
Location: Orlando
Contact:

Re: Issue with ECU field definitions on MS3 Batch Injection

Post by sdezego »

Sure, here is a log.
'90 Corrado G60 on MSns -e -> MS3 - '62 Harley Panhead

Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002

Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
sdezego
Helpful MS/Extra'er
Posts: 96
Joined: Sat Jan 07, 2006 8:50 pm
Location: Orlando
Contact:

Re: Issue with ECU field definitions on MS3 Batch Injection

Post by sdezego »

Let me know if there is anything else I can provide or help in any way.

Regards,
Shawn
'90 Corrado G60 on MSns -e -> MS3 - '62 Harley Panhead

Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002

Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Issue with ECU field definitions on MS3 Batch Injection

Post by LT401Vette »

Nope, that did it...

I created a new Field map for non sequential MS3 1.1+. So it will be in the next release.

That formula seems Ok currently if you switch from Manual to MegaSquirt, but then ego_corr is wrong.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
sdezego
Helpful MS/Extra'er
Posts: 96
Joined: Sat Jan 07, 2006 8:50 pm
Location: Orlando
Contact:

Re: Issue with ECU field definitions on MS3 Batch Injection

Post by sdezego »

Ok, thanks!
'90 Corrado G60 on MSns -e -> MS3 - '62 Harley Panhead

Supercharged 2L-20v Project Build -> https://forums.vwvortex.com/showthread.php?2805002

Making 02m 6speed Conversion Mounts for VW MKII and MKIII -> http://www.generalprinciple.com/02m
Post Reply