Strange problem with idle control

Tuning concepts, methods, tips etc.

Moderators: muythaibxr, jsmcortina

Strange problem with idle control

Postby Beemerturbo » Thu Apr 19, 2012 2:31 am

Hi,
Every time i start my engine the megasquirt controls the iac stepper motor so the engine idles around 800rpm, thats perfect but when i go for a drive on the highway and rpm is around 5000 for a while the stepper motor comes out and doesnt go back in so the engine idles around 2000-3000 rpm. If i start the engine again it's back to normal.
I'm using MS extra 3.2.1, idle control is on "iac stepper moving only"
(sorry for my bad english)
Beemerturbo
MS/Extra Newbie
 
Posts: 2
Joined: Thu Apr 19, 2012 1:42 am

Re: Strange problem with idle control

Postby billr » Thu Apr 19, 2012 8:50 am

Post your .msq and a log.
billr
Super MS/Extra'er
 
Posts: 1584
Joined: Sun May 15, 2011 11:41 am

Re: Strange problem with idle control

Postby vino2 » Thu Apr 19, 2012 10:07 am

i work togheter with "beemerturbo" on the same project.
this are the logs and the tunerstudio file, i hope i posted the right ones.


greets from belgium
vino2
MS/Extra Newbie
 
Posts: 11
Joined: Sat Oct 29, 2011 7:13 am

Re: Strange problem with idle control

Postby Beemerturbo » Sun May 13, 2012 2:16 am

the problem is solved. The pin from the stepper motor came out during driving. We set it to "always on" and now it doesnt come out
Beemerturbo
MS/Extra Newbie
 
Posts: 2
Joined: Thu Apr 19, 2012 1:42 am


Return to Tuning

Who is online

Users browsing this forum: No registered users and 0 guests