Hi,
Every time i start my engine the megasquirt controls the iac stepper motor so the engine idles around 800rpm, thats perfect but when i go for a drive on the highway and rpm is around 5000 for a while the stepper motor comes out and doesnt go back in so the engine idles around 2000-3000 rpm. If i start the engine again it's back to normal.
I'm using MS extra 3.2.1, idle control is on "iac stepper moving only"
(sorry for my bad english)
Strange problem with idle control
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 2
- Joined: Thu Apr 19, 2012 1:42 am
-
- Super MS/Extra'er
- Posts: 6828
- Joined: Sun May 15, 2011 11:41 am
- Location: Walnut Creek, Calif. USA
Re: Strange problem with idle control
Post your .msq and a log.
Re: Strange problem with idle control
i work togheter with "beemerturbo" on the same project.
this are the logs and the tunerstudio file, i hope i posted the right ones.
greets from belgium
this are the logs and the tunerstudio file, i hope i posted the right ones.
greets from belgium
-
- MS/Extra Newbie
- Posts: 2
- Joined: Thu Apr 19, 2012 1:42 am
Re: Strange problem with idle control
the problem is solved. The pin from the stepper motor came out during driving. We set it to "always on" and now it doesnt come out