Prototype: UEGO Compensator

A forum for discussing the MegaSquirt related (but non-B&G) board development, assembly, installation, and testing.

Moderators: jsmcortina, muythaibxr

Prototype: UEGO Compensator

Postby SymTech Laboratories » Thu May 31, 2012 11:07 am

We recently developed a simple module to correct a common problem with AEM UEGO wideband oxygen sensor systems. Our "UEGO compensator" was designed to normalize the analog output from UEGO systems to eliminate any offset between the UEGO's gauge and the MegaSquirt ECU's readings. For instance, your UEGO's display may read 14.7:1 but your MegaSquirt ECU is reading 14.3:1. With our UEGO compensator, both systems will correctly read 14.7:1.

The prototype digitally interfaces with the UEGO and generates its own calibrated analog signal. The finished product will be relatively inexpensive and very compact. Please email us at support@symtechlabs.com if you're interested in helping us test this potential new product. Be sure to write "UEGO Compensator Prototype" in the subject line.

Here's the fine print:
1. You must be comfortable testing prototype/alpha hardware.
2. You must provide us feedback regarding the operation of the unit, and you must relinquish the prototype if we ask you to do so.
3. You will be compensated with one unit of the finished product.

Image
SymTech Laboratories, LLC ----- MSQ File Repository: megasquirt.symtechlabs.com
Image
SymTech Laboratories
Super MS/Extra'er
 
Posts: 2188
Joined: Sun Aug 31, 2008 4:02 pm
Location: South Florida, USA

Re: Prototype: UEGO Compensator

Postby SymTech Laboratories » Fri Jun 29, 2012 10:05 pm

We have enough testers at the moment, thanks for your interest! We will update this thread when/if we decide to bring this product to market.
SymTech Laboratories, LLC ----- MSQ File Repository: megasquirt.symtechlabs.com
Image
SymTech Laboratories
Super MS/Extra'er
 
Posts: 2188
Joined: Sun Aug 31, 2008 4:02 pm
Location: South Florida, USA

Re: Prototype: UEGO Compensator

Postby AdamR » Sat Jun 30, 2012 11:10 pm

d***, I wish I saw this sooner.
AdamR
Helpful MS/Extra'er
 
Posts: 69
Joined: Tue Dec 27, 2011 11:31 pm

Re: Prototype: UEGO Compensator

Postby SymTech Laboratories » Sun Jul 01, 2012 9:51 pm

AdamR wrote:d***, I wish I saw this sooner.

That's okay, there's a chance these will be brought to production. The more people that express their interest, the likelier they will be made available.
SymTech Laboratories, LLC ----- MSQ File Repository: megasquirt.symtechlabs.com
Image
SymTech Laboratories
Super MS/Extra'er
 
Posts: 2188
Joined: Sun Aug 31, 2008 4:02 pm
Location: South Florida, USA

Re: Prototype: UEGO Compensator

Postby pac1085 » Thu Sep 06, 2012 6:46 am

Have you guys seen this issue with the Innovate MTX-L? Because it describes my problem exactly. I've tried all sorts of different grounding methods and analog output /calibration configs and the MS always reads lower than the gauge.
Current:
1995 Firebird Formula 5.3 LM7 Engine / 4L80E with MS3/MS3X 1.3.2 and Microsquirt Transmission Controller

Past:
1997 Audi A4 2.0TQM
MS3/MS3X
pac1085
Helpful MS/Extra'er
 
Posts: 98
Joined: Thu Jan 18, 2007 2:57 pm
Location: Rochester, NY

Re: Prototype: UEGO Compensator

Postby racingmini_mtl » Thu Sep 06, 2012 7:08 am

pac1085 wrote:Have you guys seen this issue with the Innovate MTX-L? Because it describes my problem exactly. I've tried all sorts of different grounding methods and analog output /calibration configs and the MS always reads lower than the gauge.

Usually this problem with Innovate products has been solved through changing the ground configuration. If you've tried this, there is another solution available: viewtopic.php?f=67&t=44280

Jean
jbperf.com Main site . . . . . . . . . . . . . . . . . . . . . . jbperf.com Forum
Image
racingmini_mtl
Super MS/Extra'er
 
Posts: 6425
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada

Re: Prototype: UEGO Compensator

Postby SymTech Laboratories » Thu Sep 06, 2012 10:33 am

pac1085 wrote:Have you guys seen this issue with the Innovate MTX-L? Because it describes my problem exactly. I've tried all sorts of different grounding methods and analog output /calibration configs and the MS always reads lower than the gauge.

We haven't seen this problem firsthand, but we can configure the chip to work with Innovate wideband systems as well. The benefit of the method our compensator uses is very low cost.
SymTech Laboratories, LLC ----- MSQ File Repository: megasquirt.symtechlabs.com
Image
SymTech Laboratories
Super MS/Extra'er
 
Posts: 2188
Joined: Sun Aug 31, 2008 4:02 pm
Location: South Florida, USA

Re: Prototype: UEGO Compensator

Postby Silverback » Sun Jun 29, 2014 1:41 pm

So does this thing exist? Is it in production? What does it cost?
Mark -- aka: WS6 TA, JYDog, 83 Crossfire TA, mpikas, mmp...
MS2 Extra | PCB 3 | HEI Mod | TPI harness Adapter | AEM UEGO wideband | 87 Trans Am | 305TPI | T5 transmission - pretty close to stock
User avatar
Silverback
Helpful MS/Extra'er
 
Posts: 64
Joined: Mon Jul 21, 2008 9:55 pm

Re: Prototype: UEGO Compensator

Postby 93white3400z » Sun Jun 29, 2014 4:12 pm

Look at the forum thread just below this one here: http://www.msextra.com/forums/viewtopic.php?f=67&t=54575

It should answer your question :)
MSDroid (Android App) for MegaSquirt available for free!
Image

Like MSDroid on Facebook
-----------------------------------------
1993 Chevrolet Cavalier Z24
3400 Turbocharged Intercooled
MS3 v3.57+MS3X
93white3400z
Master MS/Extra'er
 
Posts: 653
Joined: Mon Aug 25, 2008 11:37 pm
Location: Montreal, Quebec


Return to Expansion boards

Who is online

Users browsing this forum: No registered users and 0 guests