MS2/Extra 3.2.4 beta released

All questions about MS2/Microsquirt/Microsquirt module. See also MS2/Extra manuals

Moderators: jsmcortina, muythaibxr

Post Reply
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

MS2/Extra 3.2.4 beta released

Post by jsmcortina »

3.2.4 is released with some bugfixes over 3.2.3

As per 3.2.3, TunerStudio > 1.51 is REQUIRED. Versions 1.00x will not work. Auto-update should handle this for you or go to http://www.efianalytics.com/TunerStudio/

Changes since 3.2.3
When mis-syncing at low rpms, dwell could be miscalculated causing spark hang-on.
Clear MAP sample error every 1 second
Dwell/discharge balancing
Rationalise adv_offset(triggerOffset) greying and usage and make it work like MS3.

All users of 3.2.x are encouraged to upgrade. Pending feedback, this release should be promoted to "release" soon.

Download the zip from: http://www.msextra.com/doc/ms2extra/fil ... 4_beta.zip

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Peras
Experienced MS/Extra'er
Posts: 154
Joined: Sat Aug 18, 2007 12:47 pm

Re: MS2/Extra 3.2.4 beta released

Post by Peras »

Gave it a shot last night, drove around 50km, works well
When in doubt, flat out...
gslender
Super MS/Extra'er
Posts: 1072
Joined: Fri Sep 16, 2011 5:29 am
Location: Brisbane, Australia
Contact:

MS2/Extra 3.2.4 beta released

Post by gslender »

Hi James,

Where does this release sit compared to the Alpha 4 and upcoming Alpha 5 ?

G
Mazda MX5 + MS3 Pro
pmbrunelle
Helpful MS/Extra'er
Posts: 103
Joined: Mon Jun 06, 2011 1:21 pm
Location: Montréal, Canada

Re: MS2/Extra 3.2.4 beta released

Post by pmbrunelle »

Dwell/discharge balancing
Is this in reference to the issue mentioned here:
http://www.msextra.com/forums/viewtopic ... 91&t=45125
Gokart
Master MS/Extra'er
Posts: 667
Joined: Thu Aug 03, 2006 2:38 am
Contact:

Re: MS2/Extra 3.2.4 beta released

Post by Gokart »

gslender wrote:Hi James,

Where does this release sit compared to the Alpha 4 and upcoming Alpha 5 ?

G
Now I get confused with several updated firmwares.
Alpha series have more features and I consider 3.2.x to be outdated but
3.2.x are updated and the alpha are just left behind.
(4G63T - MSIIextra) (4G13 - MS3-beta testing)
87quest-TSI
Helpful MS/Extra'er
Posts: 118
Joined: Sat Jun 11, 2005 9:59 pm
Location: North Alabama

Re: MS2/Extra 3.2.4 beta released

Post by 87quest-TSI »

Gokart wrote:
gslender wrote:Hi James,

Where does this release sit compared to the Alpha 4 and upcoming Alpha 5 ?

G
Now I get confused with several updated firmwares.
Alpha series have more features and I consider 3.2.x to be outdated but
3.2.x are updated and the alpha are just left behind.
This may help you.
http://www.msextra.com/doc/ms2extra/upg ... #codephase
89,88,87 Conquest TSI
1971 Jeep CJ5
MS2-V3.57 with map daddy, software 3.4.2 with EDIS on a Mitsubishi 2.6l turbo.
using Tuner Studio V3.0.28 / megalog viewer V4.1.17 and Shadow Dash V1.5.02
chacaman
Helpful MS/Extra'er
Posts: 145
Joined: Sat May 03, 2008 7:35 pm

Re: MS2/Extra 3.2.4 beta released

Post by chacaman »

Upgrade from 3.2.1 to 3.2.4 FeedBack

Upgrade process:

Power on MS-II(EMS) using JimStim
export VE/Spark Table

Upgrade Firmware
Import VE/Spark Table

setup all from 0

Engine Workg Great, Sweet and Smooth

Only one Issue in my case:
i am using fan output the fan always stay ON

i made the next test:

1 - test
Engine Temp = 86C in the test moment
Enale = YES
Port = PT6 IAC1
Power On Value = 0
Tirgger Value = 1
Coolant = > 87.00
Hystrisys = 4.0
Result: Fan Always on

2 - test
Engine Temp = 82C in the test moment
Enable = NO
Port = PT6 IAC1
Power On Value = 0
Tirgger Value = 1
Coolant = > 87.00
Hystrisys = 4.0
Result: Fan Always on

3 - test
Engine Temp = 78C in the test moment
Enable = no
Port = PT6 IAC1
Power On Value = 0
Tirgger Value = 0
Coolant = > 0.0
Hystrisys = 0.0
Result: Fan Always on
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: MS2/Extra 3.2.4 beta released

Post by jsmcortina »

Just load your existing MSQ into the new firmware, all the settings should come across ok.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
chacaman
Helpful MS/Extra'er
Posts: 145
Joined: Sat May 03, 2008 7:35 pm

Re: MS2/Extra 3.2.4 beta released

Post by chacaman »

all ready load and the same issue the fan stay on all time
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: MS2/Extra 3.2.4 beta released

Post by jsmcortina »

Swap back to the previous firmware and see if the issue persists.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
chacaman
Helpful MS/Extra'er
Posts: 145
Joined: Sat May 03, 2008 7:35 pm

Re: MS2/Extra 3.2.4 beta released

Post by chacaman »

i have the same issue :x
but now turn off and turn on
what i have to check ? mmmm the 2N2222A is bad ?
aaronc7
MS/Extra Newbie
Posts: 23
Joined: Tue Apr 05, 2011 10:15 pm

Re: MS2/Extra 3.2.4 beta released

Post by aaronc7 »

This one still looking to be the next "release" version?
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: MS2/Extra 3.2.4 beta released

Post by jsmcortina »

aaronc7 wrote:This one still looking to be the next "release" version?
That's the plan, I've been busy on other things and haven't "pushed the button".

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply