88 ford turbo coupe help

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
SBARTON
MS/Extra Newbie
Posts: 1
Joined: Tue Jul 10, 2012 4:43 pm

88 ford turbo coupe help

Post by SBARTON »

Hello, my name is Steve and I need some help getting started on my Megasquirt adventure. First off I have a 88 ford thunderbird turbo coupe and a megasquirt 2 kit, heres what I got so far;
megasquirt V2.2 board with a MBII V3.01 installed in it
4 channel ignition/injection board drivers V1.0
MSN_EXTRA daughter board V2.1
megasquirt stimulator V2
a 60 pin eec connector off of the board and ready to start soldering up

I have a LC-1 wide band coming and 02 weld in bung coming in the mail.
Laptop in hand ready to go, once the battery gets here and I need a usb to 232 serial adapter.

What do I need for my tfi ignition?

Would anybody happen to have a print for soldering this thing together?

Any help would be greatly appreaciated.
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: 88 ford turbo coupe help

Post by Matt Cramer »

This guide may be what you're looking for:

http://www.diyautotune.com/tech_article ... dapter.htm
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Post Reply