The menu item needed to configure the Innovate EGO data over CAN is called 'CAN VSS, gear' (no mention of EGO) and the window that is opened is called 'CAN VSS & RTC & EGO Parameters' and there is no RTC settings there.
It would be good to have VSS, gear, EGO in both places.
Jean
Inconsistency in CAN menu
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Inconsistency in CAN menu
Agreed.
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".