ECUDataScan + MS3(X) ?

This forum is for the discussion of other projects on Megasquirt/Microsquirt hardware that don't fit into any of the other forums

Moderators: jsmcortina, muythaibxr

Post Reply
vagman
Helpful MS/Extra'er
Posts: 55
Joined: Fri Aug 03, 2012 1:37 pm
Location: Bulgaria

ECUDataScan + MS3(X) ?

Post by vagman »

Hi all,
I'm not quite sure is it the right forum to ask about this. Do you think it is possible MS3(X) to use/connect to this device just like the other standalones listed in the "News" section of the website?

http://www.ecudatascan.com/store.html
Thanks in advance!
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: ECUDataScan + MS3(X) ?

Post by Matt Cramer »

Looks like you'll need to contact them. It appears they support some aftermarket ECUs that use RS232 communications, but they don't have a list of which ones they support on the website. It's possible they can be talked into adding MS3 if they don't run it already.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
vagman
Helpful MS/Extra'er
Posts: 55
Joined: Fri Aug 03, 2012 1:37 pm
Location: Bulgaria

Re: ECUDataScan + MS3(X) ?

Post by vagman »

Hello Matt,
here is the list:
http://www.ecudatascan.com/news.html
I'm completely noob with this mater but what would they need from MS3 as info to add it in their list? Some protocols..?
http://www.youtube.com/watch?v=C3Ze6xFQksE
http://www.youtube.com/watch?feature=en ... c0yQo&NR=1
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: ECUDataScan + MS3(X) ?

Post by Matt Cramer »

You'll want to ask them, not me.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Post Reply