i have 1.0.2 firmware installed. i know i should upgrade, but things been going well so i'm cautious about changing anything.
car shut off, insert card, fire up, rev, shut down, remove card.... no file?
new card= 32GB SanDisk Ultra SDHC 30MB/s
i did not do anything to format - it arrives formatted?
settings:
SD card help
Moderators: jsmcortina, muythaibxr
SD card help
__________________________
MSIIIx V3.0 Big Poncho - Sequential fuel and ignition
Sequencer running an '80 635csi Euro M90 - Sequential fuel and ignition
MSIIIx V3.0 Big Poncho - Sequential fuel and ignition
Sequencer running an '80 635csi Euro M90 - Sequential fuel and ignition
Re: SD card help
hmmph. seems to be working now.
i upgraded TS to see what the dash said about SD card. it said SD card in and now file is on the card. straaange.
i upgraded TS to see what the dash said about SD card. it said SD card in and now file is on the card. straaange.
__________________________
MSIIIx V3.0 Big Poncho - Sequential fuel and ignition
Sequencer running an '80 635csi Euro M90 - Sequential fuel and ignition
MSIIIx V3.0 Big Poncho - Sequential fuel and ignition
Sequencer running an '80 635csi Euro M90 - Sequential fuel and ignition
-
- Site Admin
- Posts: 39612
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: SD card help
I would suggest that you do upgrade. There are a number of SDcard tweaks to the code that improve reliability.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".