SD card help

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
TheMonkey
Experienced MS/Extra'er
Posts: 199
Joined: Wed Mar 26, 2008 5:48 pm

SD card help

Post by TheMonkey »

i have 1.0.2 firmware installed. i know i should upgrade, but things been going well so i'm cautious about changing anything.

car shut off, insert card, fire up, rev, shut down, remove card.... no file?

new card= 32GB SanDisk Ultra SDHC 30MB/s

i did not do anything to format - it arrives formatted?

Image

settings:
sd settings.jpg
__________________________
MSIIIx V3.0 Big Poncho - Sequential fuel and ignition
Sequencer running an '80 635csi Euro M90 - Sequential fuel and ignition
TheMonkey
Experienced MS/Extra'er
Posts: 199
Joined: Wed Mar 26, 2008 5:48 pm

Re: SD card help

Post by TheMonkey »

hmmph. seems to be working now.

i upgraded TS to see what the dash said about SD card. it said SD card in and now file is on the card. straaange.
__________________________
MSIIIx V3.0 Big Poncho - Sequential fuel and ignition
Sequencer running an '80 635csi Euro M90 - Sequential fuel and ignition
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: SD card help

Post by jsmcortina »

I would suggest that you do upgrade. There are a number of SDcard tweaks to the code that improve reliability.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply