pitcelica's install : v3.57+MS3+MS3X

[pit_celica]

Hi, here is my latest .msq file.

Now, the car is stored for winter. I will try to add fan control and VSS for next season.

Sam

[fortmyerspolice]

Hi, here is my latest .msq file.

Now, the car is stored for winter. I will try to add fan control and VSS for next season.

Sam

Thanks!

[jasaircraft]

Very nice thread! So we could agree the triggering pattern is something like 32-2 and 1 for cam or something like that?

[pit_celica]

Very nice thread! So we could agree the triggering pattern is something like 32-2 and 1 for cam or something like that?

It's a 36-2 with a single tooth cam. Thanks for the nice words!

Sam

[jasaircraft]

Great! Im setting up a haltech ps1000 on a 4g 3sgte mounted on a Rav4, just finished making a custom wiring loom, I wanted to put a MS3 on this project but Im waiting for a password protection upgrade, not because of giving out copies but so that maps ad setup wont get fiddled with...

[tpsretard2]

Great! Im setting up a haltech ps1000 on a 4g 3sgte mounted on a Rav4, just finished making a custom wiring loom, I wanted to put a MS3 on this project but Im waiting for a password protection upgrade, not because of giving out copies but so that maps ad setup wont get fiddled with...

I just did a haltech also, it seems to have very good vr inputs. but i was not a fan of it.
the car did make good power and did work well though..

[jasaircraft]

Hi tpsretard! Ive seen a lot of your posts! What ecu model did you install?
Was it on a stock engine? Do you have power and torque figures?