will an EDIS 4 trigger wheel and VR sensor work with ...

All Megasquirt 1 support questions. See also the Documentation

Moderators: jsmcortina, muythaibxr

Post Reply
wicked93gs
Helpful MS/Extra'er
Posts: 141
Joined: Wed Mar 02, 2005 10:04 am

will an EDIS 4 trigger wheel and VR sensor work with ...

Post by wicked93gs »

an EDIS 6 setup? probably a stupid question, I dont see any why not, its just edis 4 parts are a lot easier for me to come by, and I picked up an EDIS 4 wheel...which at least I'm pretty sure will work
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Post by jsmcortina »

The 36-1 wheel and VR sensor are interchangeable between all EDIS setups. However the trigger to missing-tooth relationship is different - you'll set this when you install.

James
wicked93gs
Helpful MS/Extra'er
Posts: 141
Joined: Wed Mar 02, 2005 10:04 am

Post by wicked93gs »

thats what I had thought, well, installation wont be for a while, waiting for my pistons to come in(custom order from wiseco sucks, long wait,almost 2 months) but thanks for confirming
Post Reply