I did a microsquirt system (harness and ecu) for a shop here in NC, that built a car for a customer in Austin. I did not get much time to fine tune the car, and he drove the car from NC to TX.
He is interested in a local tuner to fine tune the car. Small block ford with single plane intake, tfi ignition, mild cam and aftermarket heads. Nothing crazy.
I likely don't even need a tuner, just some one to connect to the car, send me a log, and load an .msq I send back.
Austin TX
Moderators: jsmcortina, muythaibxr
Re: Austin TX
Bump - also in Austin looking for a local resource to help with MS tuning (or plain running at the juncture). Please PM
-
- MS/Extra Newbie
- Posts: 6
- Joined: Wed Sep 25, 2013 6:25 pm
Re: Austin TX
My brother works at http://www.colvinautomotive.com
They can probably help you out.
They can probably help you out.
-
- MS/Extra Newbie
- Posts: 6
- Joined: Sat Jun 28, 2014 6:49 pm
Re: Austin TX
If they're willing to come down to Houston i can get it sorted. Running application that needs final tuning?