STL Area?
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 2
- Joined: Tue Apr 08, 2014 7:49 pm
STL Area?
I am curious if there are any MS fluent people in the St Louis area into helping out.
-
- Super MS/Extra'er
- Posts: 2221
- Joined: Tue May 04, 2004 8:20 pm
- Location: St Louis
- Contact:
Re: STL Area?
What have you done so far and what is the motor you are trying to squirt?
-
- MS/Extra Newbie
- Posts: 11
- Joined: Thu Sep 13, 2012 4:19 pm
Re: STL Area?
im also in the area, what kind of setup are we dealing with?
-
- MS/Extra Newbie
- Posts: 2
- Joined: Tue Apr 08, 2014 7:49 pm
Re: STL Area?
As of now I am installing the setup on a NA (Eaton M90 lying in wait...) KA24DE.
V1.3 MS3X
Sequential Spark w/ IGN-1A coils
Sequential Fuel w/ high z injectors
Cam/Crank signal from stock dizzy w/ DIYAutotune decoder wheel
At present it is installed and I am diagnosing my rpm sync issue. Was just curious who were the locals with experience on here as this is my first delve into ecu tuning and I am anticipating hitting a plateau in my abilities when it comes to dialing in the tune.
V1.3 MS3X
Sequential Spark w/ IGN-1A coils
Sequential Fuel w/ high z injectors
Cam/Crank signal from stock dizzy w/ DIYAutotune decoder wheel
At present it is installed and I am diagnosing my rpm sync issue. Was just curious who were the locals with experience on here as this is my first delve into ecu tuning and I am anticipating hitting a plateau in my abilities when it comes to dialing in the tune.