BMW Motronic 1.3 Bosch coil driver specs

Specifications, applications, part numbers, and prices for various OEM fuel injection components.

Moderators: jsmcortina, muythaibxr

Post Reply
simon84
MS/Extra Newbie
Posts: 1
Joined: Mon May 09, 2011 3:24 am

BMW Motronic 1.3 Bosch coil driver specs

Post by simon84 »

Hi !

does anyone have specs or even a datasheet for the Bosch coil driver used in the 1.3 BMW Motronics ?

It appears to be a 3 pin TO-218 package and description on the IC says

"207 1289"
(bosch symbol)
"30004"

I'm just wondering if I could make use of it somehow until my other coil drivers arrive.

Cheers,

Simon
panzertank
Helpful MS/Extra'er
Posts: 76
Joined: Thu Jan 08, 2015 8:33 pm
Location: Los Angeles

Re: BMW Motronic 1.3 Bosch coil driver specs

Post by panzertank »

I was wondering this too ...did you ever find out???
MS3/90' 525iM20B25/H&rsprings/Bilstien Sportshocks/MeyleHD full front suspension kit/M5 aluminum lower control arms/E32 bushings/JL12w6x2/JLSlash1000/1AMP/Wood Grain interior frm540i/GreenLED interior/Halo projector lights/suede uplst/fold out DVD/Soon to be nitrous and turbo :evil:
grom_e30
Super MS/Extra'er
Posts: 4451
Joined: Thu Mar 08, 2012 12:44 pm
Location: UK

Re: BMW Motronic 1.3 Bosch coil driver specs

Post by grom_e30 »

i know there was a guy who reused the coil drivers from a later m3.3.1 on a megasquirt ecu, the driver has 30054 on it though.


http://m54megasquirt3.blogspot.co.uk/20 ... chive.html
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
Tjabo
Master MS/Extra'er
Posts: 846
Joined: Sat Nov 05, 2005 7:36 pm

Re: BMW Motronic 1.3 Bosch coil driver specs

Post by Tjabo »

Whoa, that is fantastic! I've been looking today at detailed pictures I took of the innards of a spare DME I have, wondering if I could just reuse the stock coil drivers inside the DME case on that nice heat sink, and use the case as my break out board. Voila, this guy already did it (much better than I would have, Lol). I plan to copy a lot of this! Even if I need to replace the Bosch ones with BIP373s, at least there is a nice place to mount them.

Nobody knows who this guy is? "Seattle Circuit"?
--'98 Dodge Neon ACR Turbo - MS3 beta test car - Sold
--'97 BMW 540i/6spd - Single Front/Top Mount Turbo 550+ HP - MS3+MS3X V3.0 - Sold but ripping in Vegas
--'97 BMW 328i 5.3 L33/TH400 Swapped drift car - MS3+MS3X V3.0 Full Sequential - Turbos And Radiator In the Trunk 9.6@144 on a 1.55 60ft
grom_e30
Super MS/Extra'er
Posts: 4451
Joined: Thu Mar 08, 2012 12:44 pm
Location: UK

Re: BMW Motronic 1.3 Bosch coil driver specs

Post by grom_e30 »

dont know him but have seen him about on e30 tech i believe
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
Tjabo
Master MS/Extra'er
Posts: 846
Joined: Sat Nov 05, 2005 7:36 pm

Re: BMW Motronic 1.3 Bosch coil driver specs

Post by Tjabo »

Thanks grom!
--'98 Dodge Neon ACR Turbo - MS3 beta test car - Sold
--'97 BMW 540i/6spd - Single Front/Top Mount Turbo 550+ HP - MS3+MS3X V3.0 - Sold but ripping in Vegas
--'97 BMW 328i 5.3 L33/TH400 Swapped drift car - MS3+MS3X V3.0 Full Sequential - Turbos And Radiator In the Trunk 9.6@144 on a 1.55 60ft
Post Reply