Hey i am looking for anyone in the Houston area that might be able to give me a hand with initial tuning for my MS3 Pro ... i should have the wiring and initial setup done in the next few weeks and it would be great if i had someone looking over my shoulder when i hit the start button for the first time to insure that i am not going to blow up my brand new motor haha.
Thanks,
Mark
Houston Area
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 89
- Joined: Tue Sep 30, 2014 7:00 am
- Location: Houston, TX
Houston Area
2000 Firebird V6 to LS3 swap.
MS3 Pro
MS3 Pro
-
- Super MS/Extra'er
- Posts: 1341
- Joined: Mon Sep 05, 2011 1:20 pm
Re: Houston Area
I'm going through a startup right now with a chap in Port Lavaca, TX. You can do a lot remotely.
Graduate of EFI University.
I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
-
- Helpful MS/Extra'er
- Posts: 89
- Joined: Tue Sep 30, 2014 7:00 am
- Location: Houston, TX
-
- Helpful MS/Extra'er
- Posts: 106
- Joined: Sat Jul 07, 2012 8:18 am
- Location: Cypress (Houston), Texas
Re: Houston Area
I am in Cypress/NW Houston and would be happy to help. Send me a PM with your phone # and I'll shoot you a text.
Tuning in Houston, TX area
https://www.racebushings.com
https://www.racebushings.com
-
- Experienced MS/Extra'er
- Posts: 256
- Joined: Sat Mar 07, 2015 4:46 pm
Re: Houston Area
I'm in NW houston as well Quan, please PM me or email htgomez09@gmail.com
it's a 1990 turbo 302 mustang.
thanks
it's a 1990 turbo 302 mustang.
thanks
1990 Mustang: MS3Pro Gen 1, 306ci, 72mm turbo, 80lb inj, 36-1 + Cam Sync + D585 coils, World heads, TFS1 cam, GT40 intake, auto, Speed Density
1987 Mustang: MS2v3.57, direct coil control, MSD VR Dizzy, SBE, Weiand 174,190cc heads, F303 cam, TBI w/ (4) 160lb inj, GT500 MAF
1987 Mustang: MS2v3.57, direct coil control, MSD VR Dizzy, SBE, Weiand 174,190cc heads, F303 cam, TBI w/ (4) 160lb inj, GT500 MAF