After starting up TS, with the normal Gauge cluster-tab showing, there's no "Gauge Cluster"-menu-item listed in the File-menu.
Only when switching views to a different tab, and then back again to the Gauge cluster-tab, the menu-item "Gauge Cluster" is then listed in the menu.
I know the File-menu is updated, depending on which tab is viewed at the moment.
The first time TS is opened, it should really show the Gauge Cluster menu-item in the File-menu, because that's the tab everyone starts out on.
Is repeatable on PC & Mac versions.
Menu bug in TS?
Moderator: LT401Vette
-
- Experienced MS/Extra'er
- Posts: 372
- Joined: Sat Dec 31, 2011 6:10 am
- Location: Netherlands
- Contact:
Menu bug in TS?
Daily driver: 1973 Dodge Dart - 360ci engine - 11.3:1cr - MS3x - ignition only. 42RH/A500 OD+LU transmission / 3.23 gears
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
-
- Super MS/Extra'er
- Posts: 12731
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Menu bug in TS?
Good to know... On OS X the menu's don't like updating on the fly for some reason.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html