Tuner studio

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
joseedgardosanchez
MS/Extra Newbie
Posts: 12
Joined: Thu Feb 02, 2017 7:53 am

Tuner studio

Post by joseedgardosanchez »

I have a megasquirt 3 and i make the datalogger by sd card in the ecu. when i put the sd card on computer, open tuner studio, click data loggin, import/conversion, convert binary log, then open the file window and i select the file (pass log), then said reading file and later open a box that said Java Runtime Enviroment not found. I installed the java version 8 update 121 (jre-8u121) and still not working. My laptop is window 7 and service pack 1, 32bit operator system. Any suggestion will be good received.
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Tuner studio

Post by LT401Vette »

What version MegaLogViewer do you have?

Try this:
- On the main menu click "Data Logging"
- Right Click on "View with MegaLogViewer"
- Click Ok to clear and reset MegaLogViewer location.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
joseedgardosanchez
MS/Extra Newbie
Posts: 12
Joined: Thu Feb 02, 2017 7:53 am

Re: Tuner studio

Post by joseedgardosanchez »

Some one could help. Thanks
joseedgardosanchez
MS/Extra Newbie
Posts: 12
Joined: Thu Feb 02, 2017 7:53 am

Re: Tuner studio

Post by joseedgardosanchez »

I have Megalog viewer HD
joseedgardosanchez
MS/Extra Newbie
Posts: 12
Joined: Thu Feb 02, 2017 7:53 am

Re: Tuner studio

Post by joseedgardosanchez »

This is my Tuner Studio
joseedgardosanchez
MS/Extra Newbie
Posts: 12
Joined: Thu Feb 02, 2017 7:53 am

Re: Tuner studio

Post by joseedgardosanchez »

Tuner studio
joseedgardosanchez
MS/Extra Newbie
Posts: 12
Joined: Thu Feb 02, 2017 7:53 am

Re: Tuner studio

Post by joseedgardosanchez »

Thank you, I make what you said and work perfect. Thanks again
Post Reply