Dyno view log gauge

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
Zakari
MS/Extra Newbie
Posts: 5
Joined: Mon Nov 14, 2016 10:03 am

Dyno view log gauge

Post by Zakari »

Hello,

I'm trying to recreate this view :

Image

But cant find this gauge style (log viewer in a dash ?)

Ideally I'd like to view multiple signals in the same spot to spot discrepencies easily (just like the view of AFR vs TPSDot from AE on the bottom right).

How can this be achieved in TS ultra ?
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Dyno view log gauge

Post by LT401Vette »

It is the "Ling Graph" Style when in designer mode
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Zakari
MS/Extra Newbie
Posts: 5
Joined: Mon Nov 14, 2016 10:03 am

Re: Dyno view log gauge

Post by Zakari »

Thank you for answering this.

I might be doing something wrong but I don't see that style of gauge in designer mode :

Image

Image

Image
sschutte
Helpful MS/Extra'er
Posts: 83
Joined: Mon Jun 27, 2016 7:51 am

Re: Dyno view log gauge

Post by sschutte »

You are correct the line graph type gauge template is not available under to the current Add Gauges dialog. Try these steps as a workaround:
1) Create a Needle Bar Gauge
2) Right click gauge > Dashboard Designer > Gauge Style > Line Graph
3) Right click gauge > (select the output channel you want to display in the graph)
4) Fine tweak size and colors as needed
Zakari
MS/Extra Newbie
Posts: 5
Joined: Mon Nov 14, 2016 10:03 am

Re: Dyno view log gauge

Post by Zakari »

Aha this works thanks !

I'm guessing we dont have a feature yet to add multiple output on the same line graph ?
If we don't, could this be considered as a feature request ?

The dyno view is really useful when it comes to tuning static tables like spark or VE, but when tuning EAE on the dyno, I'd like to be able to plot MAP vs AFR while modifying EAE settings.

Again thanks for the help, it's already gonna make the tuning a lot easier.
WestfieldMX5
Master MS/Extra'er
Posts: 403
Joined: Tue Dec 30, 2008 9:46 am
Location: Belgium
Contact:

Re: Dyno view log gauge

Post by WestfieldMX5 »

You can put several on top of each other.


Verzonden vanaf mijn iPhone met Tapatalk
2016 Westfield SEiW MX5 1.8 - 6sp - Torsen - MSM turbo - MS3 Pro - 2.3kg/hp
Post Reply