Bosch L-jetronic sensor calibrations

For discussion of Phil Tobin's Tuner Studio software (Only about the tuning software itself, not about how to tune or firmware features)

Moderator: LT401Vette

Post Reply
Spiffy
Helpful MS/Extra'er
Posts: 119
Joined: Mon Sep 19, 2016 1:57 pm

Bosch L-jetronic sensor calibrations

Post by Spiffy »

I have a Datsun with L-jetronic efi i'm converting to ms2, should I use the Saab(bosch) setting for thermistor values? It seems to be the most logical choice
DaveEFI
Super MS/Extra'er
Posts: 4175
Joined: Sun Apr 15, 2012 12:55 am
Location: SW London, UK

Re: Bosch L-jetronic sensor calibrations

Post by DaveEFI »

Spiffy wrote:I have a Datsun with L-jetronic efi i'm converting to ms2, should I use the Saab(bosch) setting for thermistor values? It seems to be the most logical choice
You'll get a pretty easy check if those are correct. Both IAT and CTS will read ambient with the engine cold.
Rover SD1 3.5 EFI
MS2 V3
EDIS
Tech Edge O2
London UK.
Spiffy
Helpful MS/Extra'er
Posts: 119
Joined: Mon Sep 19, 2016 1:57 pm

Re: Bosch L-jetronic sensor calibrations

Post by Spiffy »

I tried today but got this message, any idea as to why?
I get the same faultmessage on clt, iat and wideband sensor calibration Image
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Bosch L-jetronic sensor calibrations

Post by LT401Vette »

How are you connected?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Spiffy
Helpful MS/Extra'er
Posts: 119
Joined: Mon Sep 19, 2016 1:57 pm

Re: Bosch L-jetronic sensor calibrations

Post by Spiffy »

LT401Vette wrote:How are you connected?
Bluetooth

Sent fra min HUAWEI VNS-L31 via Tapatalk
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Bosch L-jetronic sensor calibrations

Post by LT401Vette »

That is what I was wondering... I had someone else get a similar error when they were using Bluetooth as a virtual com port.

Try it using Bluetooth direct. The comm timings with bluetooth direct are adjusted for Bluetooth.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Spiffy
Helpful MS/Extra'er
Posts: 119
Joined: Mon Sep 19, 2016 1:57 pm

Re: Bosch L-jetronic sensor calibrations

Post by Spiffy »

LT401Vette wrote:That is what I was wondering... I had someone else get a similar error when they were using Bluetooth as a virtual com port.

Try it using Bluetooth direct. The comm timings with bluetooth direct are adjusted for Bluetooth.
Forgive me my ignorance but where do I find that setting? I only have tunerstudio lite at the moment do I need the registered version or is this a Windows setting?

Sent fra min HUAWEI VNS-L31 via Tapatalk
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Bosch L-jetronic sensor calibrations

Post by LT401Vette »

It used to be only in the registered edition, but with 3.0.20 D2XX and Bluetooth Direct have been added to the Lite Edition as well.

So update and then you will see Bluetooth Direct in Communication Settings.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Spiffy
Helpful MS/Extra'er
Posts: 119
Joined: Mon Sep 19, 2016 1:57 pm

Re: Bosch L-jetronic sensor calibrations

Post by Spiffy »

Thank you, I can see it now :)
Will try out when I get back home next week! 8)
Spiffy
Helpful MS/Extra'er
Posts: 119
Joined: Mon Sep 19, 2016 1:57 pm

Re: Bosch L-jetronic sensor calibrations

Post by Spiffy »

It works now. Problem solved, thanks for the help

Sent fra min HUAWEI VNS-L31 via Tapatalk
Post Reply