im getting no spark from a ms1 i bought that apparently was set up for coil packs. im running a stock dist in my 95 ford probe gt 2.5l turbocharged. i get fuel and rpms work when cranking. ive tried many base maps including some that ive made and still nothing. if i plug my stock ecu back in it fires right up. theres a small loom of 7 wires that were cut that i believe were to the coil pack 3 black 1 red 1 yellow 1 green and 1 white. i cant figure out what they could be. any help is appreciated thanks
Sent from my SM-G920I using Tapatalk
ms1 3.0 no spark
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 12
- Joined: Tue Sep 12, 2017 12:18 am
Re: ms1 3.0 no spark
this pic failed to upload before
Sent from my SM-G920I using Tapatalk
Sent from my SM-G920I using Tapatalk