PWM With SSR For Water Injection Question

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
Scottie-GNZ
Master MS/Extra'er
Posts: 449
Joined: Tue Jun 29, 2010 5:53 am

PWM With SSR For Water Injection Question

Post by Scottie-GNZ »

I will soon be setting up meth injection with an SSR. I want to connect SW12V to the pump and use Nitrous1 to pulse the negative side. Can someone please confirm that my crude drawing below is correct.

I am assuming that since my output will be Nitrous1, I can test this in Test Mode by pulsing PP4-Nitrous1.

Thanks.

Image
Scottie
Turbo LS Volvo 244
8.746 @ 154.94
nathaninwa
Super MS/Extra'er
Posts: 2637
Joined: Tue Sep 14, 2004 4:17 pm
Location: Aberdeen, Wa

Re: PWM With SSR For Water Injection Question

Post by nathaninwa »

Looks correct to me, as long as the nitrous control is ground from ms
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
Scottie-GNZ
Master MS/Extra'er
Posts: 449
Joined: Tue Jun 29, 2010 5:53 am

Re: PWM With SSR For Water Injection Question

Post by Scottie-GNZ »

Thanks, Nathan. The plan is to use Nitrous1.
Scottie
Turbo LS Volvo 244
8.746 @ 154.94
Scottie-GNZ
Master MS/Extra'er
Posts: 449
Joined: Tue Jun 29, 2010 5:53 am

Re: PWM With SSR For Water Injection Question

Post by Scottie-GNZ »

For those running a similar setup, what kind of DC% are you finding you have to run to get the desired volume? Pic of your table with some details would be great.
Scottie
Turbo LS Volvo 244
8.746 @ 154.94
Post Reply